So while driving today I head a rattle when hitting a bump. Laid under the car and discovered i can move the brake caliper and recreate the metallic noise. I can do this both sides but one is worse than the other. Caliper bolts are tight and so are the carrier bolts. Would I be right in...

So went out laning yesterday. Car got to temperature on the road and then when laning the temperature on the gauge dropped. I've recently changed the lower coolant rail and bled the system following how sierra does it. I was in 2nd gear low range laning at about 1500 - 2000rpm. My only theory...

Hi, does anyone know where to get new plugs that commonly get water ingress in the passenger footwell?

Hi, does anyone know where to get new plugs that commonly get water ingress in the passenger footwell?

Started repairing my inner wings today, the rot had gone to the floor. Here are some before and after pictures, I'm still not quite done cutting some bits need trimming. I have a repair panel from froggarts which i think will work perfectly and the rest is actually quite straight forward...

So this month I'm replacing the inner wing with a panel from Froggatts but I also need to replace part of the passenger front floor/bulk head. What thickness metal do I need for this? It's a discovery 2.

Can anyone tell me what grease nipples are needed to grease props on a disco 2? I see that you need to remove grub screws to do it but not sure what thread etc is needed to install a grease nipple.

So my discovery 2 needs the inner wing welder and some of the bulkhead/floor where the loom is. I'm going to tackle it myself and I found one thread with pictures but does anyone else have pictures of their repairs?

Hopefully this isn't in the wrong section, my discovery 2 needs the inner wing, body mount and an outrigger welding. I'm going to pick up a welder 2nd hand, I'm a complete newbie to welding but am not afraid to learn. I've found a clarke 135te on Facebook, would this be powerful enough for...

I need to replace the aux belt and tensioner on my td5 disco. What brands would people recommend? Genuine tensioner isn't horrendous money but I've seen a SNR one advertised as OEM. I'll get a dayco belt.

Hi all, just thought I'd introduce myself. Recently purchased my first ever landrover, a pretty well used discovery 2 manual with a Td5. I'm not new to working on cars I've lived and breathed cars since I was 17ish now 27 and was a mechanic for a little while. Based in Norfolk I'm hoping to...

So I changed my ball joints at the weekend one side and I had to remove and install the shaft a couple times due to the tapers on the ball joint not allowing the knuckle to sit correctly. I can only assume I've disturbed the seal as its now leaking after a test drive. Local land rover...