Does anyone know if it's possible to make a set of Disco wheels (either 16" or 18") fit on a Freelander 1?

did you sell these?

I am looking for a cheap as poss set of FL1 wheels and tyres for a basher FL1 I have for kids to play with!

Hi Andrew, I have a FL1 just for kids to mess about with in field, shoot rabbits etc. I need a set of wheels and tyres, cheap as poss, not bothered about condition. If you know of any please let me know Thanks Martin

Thanks will wait to hear

I just glanced at age of thread and often get punched in the head for re-opening old threads :D It's a black FL1 3 door TD4. I need the internal door card/trim, the large plastic liner with a pocket in it thanks

Sorry, I will reply to the other thread - https://www.landyzone.co.uk/land-rover/freelander-1-parts.352757/

Don't suppose you have a black tailgate trim for a FL1? Do you have many other parts? Just started doing up a FL1 given to me for my son (first car!) thanks

I assume all parts are now sold? Sorry if that's a dumb question!

Neat trick re jumping the ignition. Re the deadlocks. didn't know that but in my case it would still be useful as the keys and fob were inside, and you can climb in the sunroof

Ah, no worries, grateful for the attempts to help! Turns out if very careful the sunroof is a lot more insecure than it looks. Worth knowing for future!

Two keys one fob

Nodge you're a star thank you. I was doing your procedure when my son managed to pop the sunroof up without breaking anything so we are in. Phew! Great tip re crash sensor, will store that idea for next time! Thanks very much everyone.

That's a good start thanks! However I think the rear window motor is rusted out or faulty. There's a bit more to the story... The friend who gave me it gave me another FL key and fob which he found at home (he has had tons of landys). he wasn't sure if its for this vehicle or not. The key works...

PS - Of COURSE only last year I cancelled AA membership after what must be 20+ years of membership without a call out, hard times forced me to pull the plug. Someone told me they can break in somehow, IF I was still a member of course!

deleted, wrong thread

A friend of mine gave me a 55 plate Freelander TD4 yesterday for my son to learn to drive in. It has been standing a couple of years so needs work but worth putting some time and money into as it's not had a bad life apart from being neglected recently. Got it home, parked it, put keys on dash...

Trying to help out a friend. He has replaced his auto gearbox and torque converter. Did it with Disco on its side jacked up. He checked there was drive from rear of auto box in all gears and reverse, then put transfer box on and there's no drive at all. He plugged it in today and it has one...

Thanks very much, really useful this. I need to keep the time span as short as possible when fitting as it will be taking up his whole garage/ramp until its done. I may ping you with a PM if i get stuck, if thats ok!

Thanks Frosty, very useful info there. I am hoping to avoid cutting holes in floor, removing seats etc. There looks like 2-3" of space to get welder in, slowly and carefully. Hope so anyway. Will print off your diagrams and have a good look before we start. PS We haven't decided whether to do...