Hi, Has anyone strong opinions on these panels? what paint is needed for them? Are they appropriate on a series 2 restoration. I am having real problems getting a wing straight enough to fill due to my inability to shrink the Birmabright alloy......

Wwaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaagh. my mate using a 28pound sledge hammer will not move it a millimetre. the chassis is failing....

hi is it possible to change all the main bearings with the engine in place? thanks

my land rover is a useful work platform.

any news?

On ignition what about the coil feed? some vehicle switch to only coil and starter when starting. A not infrequent fault is feed to coil which is off untill the key is released. any residual engine rotation will allow it to start. the addition of a volatile into the cylinders, will ignite, then...

Good man

We have abandoned tyre changing as it is too hot I will hide in the house and James will hide in the toilet

Big ends are easy- mains as well but--- the rear one is difficult.

having lived with that diesel engine and one of my vehicle has it still, i would advise getting a different engine.

I bought some hinges from paddocks that had 7 specific machining errors- totally useless and the killer was- More play then the ones i wished to replace! Wrote to paddock asking why did they sell such cr@p? No answer

Oh, the cause is ethanol in petrol causing non-return valves to stick, and making pumps try to pump air- which they won't.

hi, on my small fleet of vehicles i have the similar problem. It is solved by moving the electric pump down to the chassis rail- so it works as a petrol pump rather than sucker. In some cases the electric pump is fitted before the mechanical one and in series with it. This gives you the option...

Obviously a few inquiring minds have gnawed at this problem for a while but it seems like there is no commercial off the shelf (cots) solution to this- I suffer from an ACR manifold which fouls the chassis and prevents the spring shackle nut been fitted. also it is so pitted - it must fail soon...

check your toe in before you fit castor altering shims- and remember which way you want to alter them-positive or negative.

Found it! Sill Brackets Galvanized 333259 333260 Land Rover Series 2A 3 109 Station Wagon

No....

It is not shown on the ones i could find..

What is the name of the bracket which is about 100mm square that bolts to the chassis outrigger and to the rear end of the sill on a station wagon??? just trying to buy one and i cannot find them....Made of 3 plates at 90 degrees.