Please keep an eye out for my Land Rover Defender 90 stolen this morning 04th August 2012 from Huthwaite Nottinghamshire. Registration Q347FAL Any information call 01623 452885 or 07815 012772 Many Thanks

here is mine with extended arches...

I know its a long shot, however, if you dont ask you dont get I am after as many parts as possible for a 130 Double cab body. Sills B Pillars Rear Bulkhead Rear Seatbox Roof Or even a complete body... PM me with details if you can help thanks

The instrument panel light is actually an LED so without stripping the clocks you cant change it. My guess would be that the diff lock light switch has died. Try unplugging the switch on top of the front output of the transfer box. Bridge the wires and see if it puts your light on. If it...

Strange it did not need a recode? But while ever it works, be happy and use it :)

Jesus that's a bit steep. A pair of side will cost approx £50 second hand A ribbed roof would cost approx the same A flat roof closer to £100-£150 A rear door in good nick £75-£100 second hand A good body shop would have it all painted like new for £200-£300 And then as said it is 2 to 3...

They do sell lots of rubbish and every time I call them to notify them of a severe quality issue, and I quote "They have never heard of that fault before". But next time I order the same part it has the same issue. Some stuff is great from Britpart, but anything critical you need to order the...

Here is the link to the inf26 document which are the guidelines you need to work to. Hope that helps http://www.dft.gov.uk/dvla/forms/~/media/pdf/leaflets/inf26.ashx

You can try using short bursts with a plasma cutter to remove most of it then either re tap the hole or drill it oversize and helicoil.

Still waiting for pics????

Broken flex plate?

The weights on the vin plate should be Axle 1 Axle 2 Maximum gross vehicle weight Maximum train weight

I have used the RTC dampers on a couple of vehicles but not used one off road. Gives a noted improvement with lifted vehicles without correct castor angles.

If you don't use the mounting plinths, you will have to enlarge the holes in your bodywork to get them flush.

Hello there what price is on them?

I was out all night doing similar :D And a video.... https://fbcdn-video-a.akamaihd.net/cfs-ak-snc6/440371/401/10150537552018520_49427.mp4?oh=fb17c0e77d650fdbc217e63dad7a4a39&oe=4F316C00&__gda__=1328638976_393ae8125b2447cd8d3acdfddd8edde0

Fortunately traders policy covers it at no extra charge. Thank god for that.

Does anyone know what the taxation will be on a newly restored 90 that we are building that will have to be registered on a Q plate? I have had a search on the forum/DVLA/VOSA and a few other websites but no one is able to give me the answer untill the vehicle has been registered with the DVLA?

Thanks for your reply, problem was found with 1. The main relay had been replaced with a relay with pins 87 and 87a instead of 2 pin 87's 2. Throttle potentiometer read correct voltage closed and correct voltage open but had erratic readings in between.

I have tried 2 injector harnesses and done a continuity test on both. I have even bridged fresh earth wires to the ecu straight to the battery. And don't forget all components were tested and driven on another car yesterday and worked great... :-(