yer iv got that... just, when i push down the yellow knob it does nothing... it has worked when the car was up on axle props but it took lots of wiggleing of that yellow knob? could there be some dirt or something preventing the lever from moving down all the way?

well... my 4 wheel drive works perfectley in low but i cant seem to get it to go in to 4 wheel drive in high no matter how much i jiggle the little yellow nob about.... what do you reccon is wrong or am i not doing something right? also does any one know the thread size on the oil pressure...

i have just had a look in the manual and it seems to me that they are both water... so where is the oil temp sender? if there is one at all?

my friend has a light weight and that has both water and oil temp.. i had a look at that and could see the round sender but no triangle one... maybe the oil temp one is hiding some where...??

here they are... the triangular one is the water one i think and the round one is the oil... but im not sure... the easyest thing to do is unscrew the round one and see what comes out... if these are both water where is the oil temp sender?

where are they to put it bluntley...? looking at my engine there is a little triangular sender that is just to the right of the top hose from the rad..next to the thermostat. i took it off and there is water under it like there should be.. but when i connect the lead to the gauge it just goes...

rite im looking for a Snorkel for my series 2a, it no longer has its oil bath air filter so the Snorkel would need to include an air filter. have any of you chaps got one fitted? and where is is possible to buy one that will fit? i did think about making a diy one but i realy... well be arsed!!

Try these guys SPECIALIST CAR INSURANCE & CHEAP CAR INSURANCE UK FROM ADRIAN FLUX

i have found a few more pressure sender units that fit in place or in conjunction with the existing pressure stuff. i think if the thread ir wight then it should work?

i found this oil pressure sender..http://www.famousfour.co.uk/images/parts/ff002405.jpg if the thread is the same do you think it would screw in where teh oil pressure switch goes? or the existing oil pressure pipe?

does any one know if you can get electronic oil pressure senders for a 2a? 2.25 engine or one that will fit?

is there any way of adapting my series 2a to take an electronic pressure gauge?

Well.. silly me brought a new smiths electronic series iii oil pressure gauge off ebay today.. i didnt read the description propperly as i need a non electronic one. is any one intrested in it?? i would be willing to part with it for a £10'er and like £2 for postage.? or has any one got a non...

Hi Im looking for the glass lenses that were fitted on the ex-mod landrovers they are the screw in type with the four little vains on them. I have a full set but some of them the vains are missing and secondley i need to replace the bulbs and they are proving a bi*ch to undo and im afraid i...

What is with all this new Restricted right of way rubbish?

Hi The gator on my front prop is non existant! so i thought i better replace it before the MOT. how do i go about doing this? will the prop slide apart like a tractor one? or do i have to take apart the joint? cheers again yannis

cheers chaps thanks for the feed back.... i will have to get down to the local car shop and get some then before i book the MOT

does my series 2a 1972 need seat belts to pass its MOT?

what sort of sticky stuff? what glue wont perrish the rubber?

Hi I Have Just Got Some New Seals For The Vents And Im Not Sure What To Stick Them On With! What Do You Lot Use? Cheers Yannis