Im looking at getting one of these; Ashcroft Transmissions Has any one fitted one? Can it be down without taking out the greabox?

They are all in now after getting stronger bolts!

I will go buy some better threaded bar tonight and try again. I had made sure the tube was nice and smooth inside and I greased it good! On the other side I got it a bit further in and then used a bolt with a shallower pitch as there is more thread inside the nut to winde it in fully...

Right its 1/2 way in. Is there any tricks for getting it right the way in with out lots of naughty swear words and lots of blood and broken bolts? I have been using M14 threaded bar to wind them in but this bent then stripped. Will a new pice of M14 that hasnt had the abuse from winding in...

I have been driving the land rover all week now. I have an oil pressure gauge and the reading is perfect. As I say, the build up of oil in the sump clears in well under 30 seconds. The extra ammount of oil comes up about 10mm from the Max mark on the dip stick so its not excessive.

Right, I have fitted my oil cooler and I have changed the oil. When I turn the oil cooler on it sucks a load of oil around the cooler and pipes etc. This pulls the oil level right down from Max to about Min. When the engine is not running the oil drains back down to the sump and puts the...

Hi, I’m looking for some revolver shackles and also the tilting front mounts that gone 2 far produced. I don’t spose any one has any they want to sell, or where I can source the parts as every one seems to be out of business? Kind Regards Yannis

ummmmm V8

ep90 GL4 goes in gear box, make sure you get GL4 though not GL5 or the brass parts in your gear box will get eaten up.

Just seen these on Ebay, Land Rover Military Lights on eBay (end time 12-Sep-09 19:26:01 BST) Would have got some my self if I hadnt brought some last month :(......... Driving distance as well :(:(

I also have an oil cooler to put on, will that help much?

First my spec is; Recon Military Engine 2.25 petrol HD 4 core RAD Electric Fan Well the reason for my idea... I want to get rid of the fan on the front of the engine, I have an electric fan, but I tried just that at the week end and when I got stuck every thing got a bit hot and the rad...

Even if im only running electric fans that I can turn on and off?

If I were to plumb in a second radiator in the back with an electric fan on it, would this put to much strain on the water pump?

Does your battery flatten it self? If not there is no need to rewire every thing, just live with the sparkes :) But if you do decide to rewire it, do it propperly, get some 13+ core cable all diffrent colours and start from scratch. If you just use red and black you will get no where and if...

YouTube - Land Rover Series Swim

I have not told people where it is exactley, as its an invite only we dont want people turning up willy nilly! Yannis

Mine usually crunches a bit. Try reving up a bit with your foot on the clutch. This can stop the crunch, well it does for me.... give it a go!

Its an easy job that you can do in less than a day. Look for Swivel Kit on Paddocks. I have just done mine :)