This is what it will look like; What I want to know is what socket size do I need? 32mm or 35mm? Below is what I have found but im not sure to go with the 32mm socket as I dont think the nut will fit inside as per my first post? "Special tool 600300. You need this to work with the nut...

Hi, I am replacing the nut on the rear of the main shaft. I need to make my self a Land Rover Special Tool 600300 I have heared that you can use a 32mm deep socket and cut it into shape using an angry grinder. My only question is that the special nut measures 35mm accross, so wouldnt...

Right, I have started to notice a dramatic drop in top end power. 4th gear hills are now 3rd gear hills, it takes forever to get to 40mph etc... Can I have some ideas of possible problems? I can confirm the rings are still nice and tight so that is one tick off the list. Cheers Yannis

No the holders are in use with the new lights :(

They all screw into the same fitting. I have these on my 2a, changed over from the glass ones as I could never get them undone. I have a full set of glass ones in perfect condition, non of the lugs chipped off ;) bet its worth a fortune....

I remember seeing these some time back and there on again; Land Rover Military Lights on eBay (end time 12-Feb-10 21:28:24 GMT) I have broken 2 of my new set so I may order a spare set. Looks good for the price.

That will be great :)

Has no one got one they can measure? Maybe you have a contact that I can ask? I could email Britpart.... they might know ;)

Hi, Can any one tell me what the distance A is on the diagram below for; 1 Rear Chassis Bush 2 Rear Spring Bush Thanks for your help. Yannis

Well when it does get up to temp and if it does leak... I will just add an egg or 2 to the rad ;)

Right, I better get some more. Will the freezout have done any damage?

Nope, there has always been water and Anti Freez maybe only a small ammount though. I have been out in it since I put the antifreez in so it has had a good chance to mix in.

Went out to the land rover this morning and thought to me self better check the cooling system before I attempt to start it... I poked my finger down into the rad and yep its solid, only put anti freez in it 2 days ago, a good dose to. The water pump is also solid...... Once it has all...

Hi Guys, I dont belive it to be the springs as the problem was appartent with the leaves that I have just taken off. It could be the front spring mount, where the bolt goes through. The hole was quite big, maybe the spring is riding flatter than it should as the ankor points are futher...

Hi, To clear things up; - No Free Wheeling Hubs - 4x4 works a treat in low - 4x4 will not engage in high range When I push the yellow knob down 4x4 will engage for about 10 feet and then it will jump out. The cover around the selector at the front of the transfer box is as bent as...

My yellow Knob isnt working? When I push it down, nothing happens. I dont think its engaging properly. What can I check eaisley or what can I do to fix the problem?

Right, I have fitted some nice new parabolic springs and WHOA what a diffrence. One problem the rear right hand corner of the land rover used to sag on the old springs and it seems to be doing the same with the new ones? Its really quite alot... Im not really sure what the problem is...

HPC 4 boys

Right, I have never noticed it before... I had been out on about a 3/5 hour drive last night and when I got back I looked under the bonnet and noticed the exhaust manifold slightley glowing. The engine temprature is always where it should be if not to cold with the new oil cooler. ;) I...

I couldnt get my gearbox and engine to go together. Spline wouldnt line up and I was getting annoyed. If you connect up the starter motor with the engine in place and just ticlkle the engine over the splines line up and every thing goes together with a bang. This worked for me and made the...