I suspect that my viscous is coupled all time for two reasons: 1) I don't ear the sound of the coupling. I have been told the the coupling makes special sound i am not supposed to miss. 2) again, the fan passed the paper test (youtube film) Tomorow i will film the fan while starting the engine...

First, when i check the viscous fan i have to say i start working imidiatlly, even in low temp. At 85c i put the newspaper and it was tear apart. I think i never saw my engine work without the fan. The engine is td5 2004

One more thing..... I don't know if i says something but i have notice that the temperature increase much more easyly and quick when the car is standing (traffic)

Hi everyone, I would like to know what you think about a possible problem i have. I live in a very hot wether, speicialy in the summer. This week the temperature were 40 - 45c. During driving at hot day with a.c of course the temp of the engine usually is 93-96c.ln the last few mounts i had a...

Hi sierrafery, I feel that i owe you an update.... I replaced the washers of the front actuator that were leaked. First it didn't seems to help, the minute i took a turn at certain speed the light turned on. Today i finally drove to the mechanic very slowly at the turns trying to keep the...

Thanks a lot

U r right, the movement is to the sides only but it feels that it is too easy, too freely. The actuator itself is bran new

I wish to do that as soon as possible but the question is if i can do it by myself or go to mechanic. I don't have a press or any other spacial tool

Hello everyone, Yesterday, during ace system testing i found out that one of the bushs (RBX101740) is broken. I would like to know if you have any experience with replacing it? Would i need a press or any other special tool for this job. Proper link will be grate

Thank you very much, you are amazing

The resistance is 0 around the conector through the purple wire. I will go to check with a computer. About the bush rbx101740, can i replace it by myself with ordinary tools or i will need special tools for that?

Thank u, i will do that Again, thank u very much

The connector looks fine to me....

You are right, this part is rbx101740 indeed. I think that this is the fubar part at my car. Hope i am right

Thanks, i probably will go to electrician... One last thing... is it possible that the bush i need to replace for the shaky actuator is this one?

I tried to push the purple wire further inside but it continued to jump out. Is there any other way to reconnect the wire? Do i need any special tool for that?

Hi sierrafery I checked the resistance of the two DCVs and it came 2.4 and 2.6 (Front). I checked the orange connector and one of the wires was a little bit sticking out but not loose (pic). The most strange thing that i found was the loose front actuator. I am not sure how it is suppose to be...