Ah cool, glad you got it sorted, now just make sure the dust cover is fitted to the compressor - spotted this while finding the fuse info out about the link harness. Apparently on the Gulf spec P38 there should be a dust cover on the front of the compressor to stop sand/dust ingress which will...

Im guessing you mean bits 7 & 6... Number 7 is listed as 'STEM-INTERIOR MIRROR, LH' - CTN100071PJ - £3.50 Number 6 is listed as 'STEM-INTERIOR MIRROR, RH' - CTN100061PJ - £3.50 Im not totally sure which one you need as there is then also part number (not shown in the diagram below)... COVER...

Is it only the GEMS petrol vehicles that dont crank when the code is lost then?? -Wills :)

Have you checked the little vacuum pipes that operate the cruise system in the engine bay? -Wills :)

I think he has been reading the ETM, the dual pressure switch is actually what some people also refer to as the trinary pressure switch, infact in the tech bulletins its referred to as that but in the ETM is called the dual pressure switch, im hoping he has checked the one with the more wires...

The only thing that needs to be 'reset' when fitting a new HeVAC ECU is the blend motors, like Irish said, the ECU needs to learn the range which the flaps can operate through. You don't need to activate anything else with the computer. Do you know whether your vehicle has had the A/C...

I like the original look of the late P38 with its clear lens indicators, black surround headlights and other little things they did to update the model as it got past 99 BUT I still think the addition of the running boards, roof rack + cross bars, nudge bars and front spotlights add to the...

Yes, if they dont then open cubby box, remove the 2 screws from the top of the switch pack, tilt it forward and then twist the bulb holder in the back of the pack to release it. You replace the bulb by pulling the old one out of its holder. Its a 2 watt wheat grain style bulb in there, I only...

Having heard of this in the past its usually the dimmer switch thingy on the indicator stalk, if the lights don't come up when you try and adjust the brightness then the switch is probably knackered. You would need a new indicator stalk to fix this. There is at least 1 on eBay at the moment -...

Is the book showing on the screen?? What happens if you start the vehicle, make sure the A/C is off, set it to LO both sides with the air to the face vent, turn up the blowers to half and then press the button to let the A/C come back on, do you get any sort of drop in engine revs at all like...

The cigarette lighter?? Not that I smoke but its worked everytime Ive needed to use it. -Wills :)

I dont quite understand, they say they have looked into all the above mentioned things yet they now want to remove the roof lining to check for something they say they have checked :confused::confused::suspicious::suspicious: Did the vehicle come with a warranty from them?? -Wills :)

Sounds like you need to get the vehicle to a garage that has the correct diagnostic equipment to re-synch the BeCM and engine ECU security codes. They can can lost when the battery drains slowly. See http://www.landyzone.co.uk/lz/f10/cranks-but-won-t-start-67481.html this person has had...

Did he also test the battery?? -Wills :)

I agree with him, before starting to worry about anything that is a design fault or structurally wrong go for the simple things. Sun roof drains can and do get blocked. When I bought my P38 a pipe had come off the one-way valve in the boot behind one of the panels which meant when I operated...

did it start and run after changing the HT leads?? the fault message you described is probably because the voltage was low due to a flat battery. Now it charged you say it cranks but wont fire, what year P38 is it you have?? Is the check engine light showing when the ignition is turned on...

hmmm, is it a P38 you have?? -Wills :)

flickering as in on and off or pulsing?? -Wills :)

fookin slitty driver :fighting: -Wills :)

The error messages when you operate the windows, what are they? If they need setting then do a search on how to set the windows and you will also have that sorted. -Wills :)