Hi could check harness for the injectors as suggested. I had an injector fail (comes on suddenly) ran rough when power on but the engine felt smooth when used as engine brake eg slowing down.I put a second hand injector in and had it calibrated no problems since also put in new improved harness...

Ta I will check I'm happy to get a reasonable s/hand if anyone knows of one or even a whole dash post to Australia?

Hi all,can anyone suggest where I can get a good ignition /light combo switch for a 64 series 2a? Thanks Steve

Thanks for the info and photos, I'll be incorporating the really nice angled look,really does make it a neat job!

Hi all I'm about to make a set of rock sliders for my td5.I have decided on 50x75 mm rhs just trying to decide on 4mm or 5mm thick.I plan to build in jacking points. I don't want to build in any unnessesary weight Any comments

Hi great to see photos as I'm planning to do a rebuild. Try mortuary gloves they are like heavy duty surgical gloves, quite tough and still allow you to feel what's going on unlike heavy rubber chemical resistant ones.

Hi all I have just acquired a series 2 and was wondering if anyone is aware of a windscreen wiper/blade upgrade asI am planning on keeping it at a wet part of Aust.

Hi Charles What type ? brand of boost guage di you fit?

Hi I recently redid all the bearings/linings etc on my td5. I made a wheel nut socket which works well. You can use a long pole to undo the nut and a large 1/2 inch drive allen hex socket to tighten it up to approx 150 ( I know about the torque multiplier effect of the extension). I'll post a...

I was looking for a reputable supply of an upgraded intercooler for my td5, I guess this reduces my list by one!!! Any other suggestions?

Probably a good idea to download the rave cd as there are quite a few differences but they seem to mainly be of concern from a part swapping point of view. It should have its own ecu as they are different after 2002 I think.

Yep they are pop rivetted in. See Land Rover Monthly Aug 2007 they take you through the fitting step by step.

Hi, I had a similar dilema ended up getting a set of cooper stt muds.I only use my 110 for trips etc but I often have to drive 400ks to get there.Speed limit over here is 110kph so I don't have any probs that way.I prefer to able to cope with most situations. Recently I had the only vehicle...

Hi just a couple of questions on behalf of my brother! He has just bought a 98 l series freelander Cummings t/diesel. Has a knocking noise from the front , sounds like a metal knock when going over small bumps even on road, prob suspension bush but ideas welcome. Other problem...

Checked on a computer. Seems it's not firing, have been working through with Charles.I have fitted a new injedtor harness and am going to get it checked again.Have checked the oil in the loom prob ; not apparent but i will do a really thorough investigation.

Hi anyone have ideas for contacts re td5 injectors. Looks like I may have to replace one. Could be interested in a good second hand if available, needs to be reliable source as I'm in Australia so don't want to buy some thing thats rubbish. Thanks.

Hi may be worth checking your brake arm pivot I've heard that if it's not returning fully it doesn't allow pressure in the system to release so it rachets up building up pressure. Perhaps the few quick taps did not allow presure to release quickly enough.Could be a dry pivot point a dicky spring...

I would start bygiving it a good clean to see where its leaking from. The tank is plastic with a thin steel cover, may be punctured. Fuel pump sits in tank from the top, as the fuel is recirulated it could be leaking through the delivery/return piping.Possibly a split filler tube.

I will have a couple when they are available, do you post to Australia???

Thanks I will give you a call and try craddocks if it comes to it.