I will keep an eye on this post! I had similar problem with mine! But the end result was fixed by replacing the pedal assembly shaft? (Due to rust on the old one)?? Kev

Assuming this noise is the same you had in your last post? Sounds like you will need to check the area and start to Tighten or Replace anything that is loose or missing? Another pair of ears will also help! Kev

Very off topic 😅🤣😂 (Bumper v Handle!!) You can only try! If not working send back or sell to D2 owner? I'm sure a couple of days/weeks will not hurt mate! Kev

Should be the same! Same problem a few years ago, picked up 2003 bumper for my 1999 D2👍 Now changed it for steel one last year! Plastic bumpers don't like bollards 😅🤣 Kev

Its on my list (long list 😁) to do over time, but very near the top! Kev

Update is needed when done! Kev

Bloody corrective text😡 'There' 'Saw' Kev

The are some cheaper ones in ebay? I think I sore £60ish?? Kev

@nomechanic fare one 🤞

Having read your post! £7-8k for chassis?? Gold plated??🤔 Bite the bullet and see if you can get the price down on the welding! Get it through its yearly appointment! Then invest in a small welder yourself! Then you have the whole year to learn! then sort any problems that it throws up? And...

That works too🤣 I did not have a pit or ramp? Dropped on the ground and pulled away! Kev

My working life is working with ropes? And solving problems is part and parcel of that job 😂😜 Kev

Make sure it's empty! All connections are disconnected? Ensure you have some straps underneath the tank! I connected 2 ratchet straps on either side of the roof gullies! Both straps were fed through one of those 'Bags for Life' to go under the the tank/guard Ratchet the straps so they are...

There is always a solution!! But as an owner of a D2! Can't help you! Sorry We use 3-in-one, WD40 and gaffer tape😂😂 But! You could try checking from Steering wheel down!! Kev

You could do a Dye Test!! Less than a tenner in toolstation?? If your carpets are 'White' don't 😂 Kev

490 Miles to far for me?? 😜😂🤣 Kev

When you have cleared the area! You should be able to see where you need to go! As for cleaning the rot! Take it back to clean steel? (Your looking at minimum 10mm clean steel for your plate/patch) Kev

Looks brilliant mate👍😁 And the same places as mine😜 Good work. Kev

I replied to one! With pics attached Kev

Always a good idea! Should not take long! Just back sure its done under cover or a good weekend of no rain? And a second person with torch!! Kev NB: torch also good for footwell!!