Hi, you might want to pop over to 'Introduce Yourself' first! There is a wealth of knowledge on here (Search Tab), let us know what your Driving, where you are (rough area!!), Post your problem (we can see it) get the help! And let us know if it has helped! Or let us know if it was sorted by...

I know it's easier said than done! It should be the reverse of what you have done to remove the old one! Bit a fresh pair of eyes in the morning should help! After a cup of Tea or Coffee. I don't think there is a specific way to get it in!! I think it just may be the collar? Kev

I think it was 2mm? Spent enough time doing the fabrication on it? Both sides! And footwells! Kev

That's doable 😂😊 Same areas as mine?? Kev

If I need to replace metal? I will look at the middle price range?? Some have a good warranty on them? If I need to replace Critical (Life Saving/Engine parts) parts!! Toward the higher price range, from well known suppliers (they don't like their goods in a bad light!!). Cheap goods!! You...

Already answered my next question! Kev

Hi, you might want to pop over to 'Introduce Yourself' first! There is a wealth of knowledge on here, as you have seen and read, let us know what your Driving, where you are? Post your problem (we can see it) get the help! And let us know if it has helped! Kev

New battery?? Kev

Thanks for the update 👍🤪 This needs to happen more often I read and comment on posts, as do quite a few on here! And we seem to have a conversation among ourselves without the original poster not replying 😑 Kev

@Gingerbread Have you checked the other areas mentioned! If you have? Good or Bad!! As for that 'Weep Hole'! No, leave it alone, unless you have changed the metalwork around the Arch/Bulkhead! Kev

Hi @podshole you might want to pop over to 'Introduce Yourself' first! There is a wealth of knowledge on here, let us know what your Driving, where you are? Post your problem (we can see it) get the help! And let us know if it has helped! Kevin Td5 driver🤪

As @Stanleysteamer said! Check the area between the arch and bulkhead? On both sides, you will need to move away the dampener to view the area?? As for panels? Have a look at eBay? As there are some on there for numerous prices 🤔 Also we have both just done welding around those areas. Kev

I did not about 6 months ago! So now I'm learning a now skill, I'm hoping to keep my Td5 on the road for as long as possible 😊 Hope you get sorted? Kev

You have a couple of members on LZ on here, who are Kent based?? 1 just outside Faversham @oiley, 1 in Canterbury @Langers and 1 just out Dover @gregsargent Not sure if they are still active?? Or as mentioned above!! Mobile welder?? Or get yourself one, if you don't have one yourself! (Price...

Where abouts??

Copy and paste your post, and send to this site!! https://www.disco5forums.co.uk/ You, hopefully get a quicker response!! Sorry you got no assistance on Landyzone🤔 Hope you find out the issue. All the best Kev

Did you fab the sill? Kev

Same area as mine🙄 But I had both sides😫 and both wings! Same garage for the MoT! So surprised it was not picked up the year before?? Kev

And the post does not show the end result 🙄 But I'm on the road now when it passed MoT with 2 advisories, none being what we had done! (one being done when left the garage) Kev

And the post does not show the end result 🙄 But I'm on the road now when it passed MoT with 2 advisories, none being what we had done! Kev