1. D

    Tyre Question

    Not sure, but I think that type of plug repair is ilegal, thought it had to be the mushroom type that's fitted from inside. Handy to carry though :) .
  2. D

    Removing DIY window tint

    Not sure ,could try the chemist .
  3. D

    Removing DIY window tint

    Seen a guy using ammonia to remove tint :eek: , reckons it's the best way .
  4. D

    OI Baz

    Easy way to slide a disco box back on your own, is to use a small trolley jack on an old bread/engine trolley, the sort with swivel wheels. Much easier to line back up than just a jack. :D .
  5. D

    Welding rods

    Does anyone use 6011 rods Used the last of mine and no one seems to have any :mad: , Someone must stock them .
  6. D

    Urgent help please!!!

    Check the pushrods ok .
  7. D

    Urgent help please!!!

    Slack each injector pipe in turn with the engine running, see if there's one that makes little difference . Did you recheck the valves after you first run it ?, a tight clearence can cause rough running .
  8. D

    Urgent help please!!!

    Could be worth checking valve clearance again .
  9. D

    Urgent help please!!!

    Is there fuel at the filter ,slack the bleed screw, see if the lift pump is pulling it through .
  10. D

    Gti brigade at traffic lights

    I had an escort cosworth, around 230 bhp , 0-60 was just under 6 sec .
  11. D

    Early Discovery 1 rear antiroll links

    Early 200's never had them fitted , on later one's that had them, brackets are welded to the chassis not bolted, same on the axle .
  12. D

    Please help! My disco won't start

    Is it a 200 or 300 ? , on the 200 there is a box under the dash, drivers side next to the fuse panel, it seems to control the immobiliser/locking. I had trouble with mine and had to bypass it .
  13. D

    Early Discovery 1 rear antiroll links

    Deffo aftermarket or home grown I'd take it off , but if you do want to keep it you could make some links up using rod end type joints .
  14. D

    Rattly, jingly chattering from underneath my 300tdi

    Maybe you could use some sort of mastic or a tube of no more rattle :D , I took mine off then tapped around the hole to make it smaller, been okay since .
  15. D

    Rattly, jingly chattering from underneath my 300tdi

    Could be exhaust , also check the mud shield on the front output flange of the transfer box, it's pressed on and can come loose .
  16. D

    Early Discovery 1 rear antiroll links

    If it is an aftermarket one you can remove all trace of it , then MOT it no problem. Is it on old springs and shocks ? , if so it may handle like a bag of **** :D .
  17. D

    Wales Trip North-mid wales

    That's fine , can get there earlier if you want .
  18. D

    Early Discovery 1 rear antiroll links

    Any pics ,could be an aftermarket job .
  19. D

    Wales Trip North-mid wales

    No probs, just have to sort a time out ,nearer the time :D .
  20. D

    Wales Trip North-mid wales

    Will meet at the campsite sat morning, can't get away friday and it's only about an hour from me . Got a new cb,should be able to hear this time :doh: , just need to sort this swr ****e out :mad: .