the first p38 box still have that problem 95...96 versie ?

normally if you go for a mot emission testing first ; the mechanic will push the gas pedal hard down to the floor , this will kill the transmission ,

hi , :confused::confused: will emissions testing destroy the 4 hp22 auto transmission if the engine is on high idle 2500 rpm :D:D.

i have no problem ,, have the battery out for more that 19 days in aprils ; connect it back , and it fire straight away ;;;

you can try this ,,,,,,,, I just leave the key in the cylinder for about 1/2 hour and after that she start again that was 2 to 3 year ago ,

here ,,,,,,,,,,,in malaysia they swap a toyota engine in a p38,,,,,,,:doh: Land Rover Range Rover 3.0 Twin Turbo 2JZ (A) -97 This is originally a 4.6 HSE but the engine has been swapped with a 3.0 Twin Turbo 2JZ from a Toyota Supra, very powerful, JPJ approved. Full leather interior and...

dig deeper at gm motor Opel;; Vauxhall Motors

hot start is not a issue on the p38 if you check the control the injection pump timing every 20.000 to 30.000 kilometer , bmw never have the problem.. is only range rover mechanic &é"'(§è!çà) of they don.t want &é"'(§è!çà)

how do you known the different between the 2 parts .. writed on the part itself ?

what is the different betweent the 2 and 3 generation arnetto air suspension

how to fecking microprcessor 555 can you please explace it briefly

well I have order a temperatuur sensor today on the net , will fix it if it arrive ;;

:):confused:Hi folk ;; i just remove the inlet manifold and the alternator ;; alternator is not changing right; have a new 12 volt regulator install ; i just thinking do i need to change the temperatuur sensor , it always in good working condition , but that is already 14 year of age ...

oh ,, :Dbuying a right drive :argue:to drive left hand drive in france :mad:

i think that the seal in the valve compartment is breaking down. i have beeb search myself for the parts nr ,,, for the 4hp22 seal myself ,, anyone there with a rave ,, can give the parts nr .........please

hi all ..... which rubber of seal you still have to change in in the valve section please thank

anyone have any idea rubber seal part no .............. rtc4660 is the assy piston parts nr.... thank

hi ::: have anyone use to test of measure the transmission soleniod valve manually 4HP22 ..4HP24 inside of outside the box :confused: , and the value of the OHM , resistor should been ??? 1; the pressure valve SOL 05 :blabla: 2; lockup valve SOL 03 :blabla: 3;inductive sensor...

hi; all ; What type of Diagnose kit of ODB2 are you using to read { repair} your engine , transmission Becm air suspension on the range

flash the whole system is the best oil change , do it with low air pressure if you have ;;;;;;;;;