1. C

    stc2260

    I have done this a a couple of time 9 year , so it not a problem for me , the only thing is the cheap Chinese indicator that give me the trouble after 8 year of owning it . not so smooth as before ,, :D:D:rolleyes:
  2. C

    stc2260

    the idling is always high when i bought the car 9 year ago , sorry for the degrees , is it plus 6 on test dial indicator
  3. C

    LRT-12-093 and LRT-12-094

    viscous fan has a left hand threat actually you need a long spanner , with your hand hit hard and fast to the right hand side , the viscous fan will loose ,
  4. C

    stc2260

    have re time the chain stress , it out to + 6 degree after TDC , re time back , turn the crankshaft clockwise five time to confirm that it good in order 1st time it is also out in order , after recheck it again and recheck five time before all is in order , modulation now on hawkeye...
  5. C

    stc2260

    modution of the engine is in good , steady ,solid sound , exhaust gas clean and good I will re time and see , what is wrong ,
  6. C

    stc2260

    modulation is good , have a copper washer today . think the copper washer outside diameter is a bit bigger, will re time the chain stress tomorrow if I have time what a job,,:D check with hawkeye 2.6 tot 3.9 ignition before DTC
  7. C

    Wife wants me to get rid of it

    :rolleyes:it always cheaper to need the old wife THAT MARRIED ANOTHER ONE??:D:D
  8. C

    stc2260

    have a reading with the hawkeye but have not problem at all , i think the copper washer should be a problem , before I control the chain stress every is fine , so maybe the one from the plumping store is to thick , will thickness have influence on the fuel pump injection
  9. C

    stc2260

    order a set set of glow plug BERU and change them too , all tester ok before I fit it ,
  10. C

    stc2260

    two days ago .control the injecting time for chain stress , change the copper washer ( buy it from a local plumping store ) thrown the old one away, it start good in hot condition but bad in cold ,
  11. C

    stc2260

    is this fuel pump copper Washer-sealing stc2260 the same if you got it from a normal parts store
  12. C

    Where to buy a Mann & Hummel Rocker cover valve breather

    it is the same parts nr stc 2806 or part no....3911170939
  13. C

    Where to buy a Mann & Hummel Rocker cover valve breather

    of hier more cheaper send a email first with photo to confirm before order FMH-3911170939 FILTER-Brand Specific(Mann) FMH-3911170939 FILTER-Brand Specific(Mann) | In-Line Filters
  14. C

    Where to buy a Mann & Hummel Rocker cover valve breather

    check if it is part no....3911170939....if that is you can order hier or send them a email with a photo ,,,, MANN-FILTER: 3911170939, Oil Filters, Air Filters, Fuel Filters: Stocking factory authorized distributor of MANN Filters
  15. C

    whats the name of this part

    see..... that a secondhand ( used part ) the new one you can order from ex transport cost https://www.inlinefilters.co.uk
  16. C

    whats the name of this part

    sorry hier is the nr :bounce:http://euroauto.ru/?option=com_retaillist&task=partinfo&nr=3366025&ah=1
  17. C

    whats the name of this part

    LandyZone - Land Rover Forum ASSEMBLEY DEPRESSION CONTROL RANGE ROVER 95-02 - STC2806 this cost less that 20 £ ex shipping cost 3911170939 part if i am right ..you can send a message to or check this out https://www.inlinefilters.co.uk
  18. C

    whats the name of this part

    :confused: is that part nr 3911170939 that it should no been more that £ 100:D do a search on the net
  19. C

    auto gearbox diy compushift..geeks only..

    you don,t need the ECU only some old switch connector are not the same
  20. C

    auto gearbox diy compushift..geeks only..

    didn,t need a ecu , but you have to check the oil sensor the xyz switch and all those switch in the box ,, the early ion and the old version is not the same but don,t known much about { mean the electric connector plug is not the same ) so you have to switch over for the 4hp222 to the...