Remove the 2 screws & replace the O ring… Yep I know how much diesel they loose as it’s happened to me. (Think I turned the o ring over to get me home) Nothing will fall out

Welding has gone crap with most of the suppliers. Thickness of metal has gone thinner. Most plastics are the same. Nothing built to cope with a few years of abuse

Make sure it’s a plastic 1. The old paper ones don’t last long

Popffff series 1 no heater,door seals,etc You lot have too many luxuries (As for the 90 heater,rad muff for the winter months warms things up faster)

Pics would be of the unimpressed passenger waiting for something to let go ;)

Have you turned the knob on the relay till the trailer light on dash flashes once? does the turn signal work on the dash?

Have you twisted the knob on the led relay? Also what year is the motor?

Series windscreen wiper wheel(incomplete) Puller of some description Wiper motor Unknown parts

Are you using the chassis or reg number to find the part? You will need to get that front pulley off. (Allen key in middle & ring spanner,spanner may need a shock knock to start with)

You need a new alternator. The bearings & bushes will be U/S in the 1 you have

Parents decided yellow Cotswold chipping not a good choice for a drive & my landrover ;)

When you park it up after a long drive see how much oil is on the floor.the next day Most of these leak more oil than they burn.

For big trips. Few bits of straight pipe(various sizes(slide in each other to save space) Straight metal joiners for pipes electric fuel pump 2xujs(make sure they fit front rear props) Diesel filter That’s about it… all other stuff I could live with being damaged but above gets you to most...

Ooo the good old starter handle hole….

Slow…. But have a few friends checking some routes/lanes next week. Gave a few locations for them to check while they are in wales. Need to hop on the Motobike & spot some lanes. Been doing too much driving,even last weekend with no time to sit on computers.

If it’s weeping grease the ball may be pitted/scored Are you using 1 shot grease?

Swap the 12v over and see if the LED is at fault. Only 3 cables go to the lights. Earth Dipped beam High beam

can’t see 1… or the other 3.

At least it was warm, but had the help off the dog,need to plan 1 more day to convert the rear tub to accept the bed for a camping trip

Busy day… Removed the tunnel to get a lot of work done easily. Hi/low lever not holding low correctly so rotated a collar a bit(road test later) Easy gear box oil acsess(top up) Grease prop shafts from above Remove middle seat panel for the transfer box oil & tighten up disk handbrake Crawl...