1. abcdedd

    New chassis.. radiator woes..

    Oops, in my tiredness that didnt make any sense.. I have fitted a 300tdi engine onto a 2.5na chassis is what i meant to say, is the only way im going to do this is chop the rad mounts on the chassis? :(
  2. abcdedd

    New chassis.. radiator woes..

    Hi guys, wondered if anyone had any suggestions.. i have a brand new galvinised chassis on my rebuild, ordered a 200tdi chassis so i can use my lt77 gearbox and have modified mounting system bought for the engine, all built up and going well went to offer up my radiator, but it sits about an...
  3. abcdedd

    Radius arm mod, where?

    Awsome bit of driving there, lovely truck, but its got to be driven properly.. and that was!
  4. abcdedd

    are my arches big enough

    You get paranoid that when a copper turns around behind you that hes going to nick you for your mud guards not being big enough? Sounds to me like your extremely paranoid about the coppers! Got something to hide?! ;)
  5. abcdedd

    Fuel system layout

    thought so, im fairly sure i know which one is which, but will pull the pipes out and check it out, thanks for your help once again James, fingers crossed it all bleeds up alright!
  6. abcdedd

    Fuel system layout

    Brilliant, i really appreciate your help James, now i just need to find out which pipe is which on the fuel tank, or doesnt it matter?
  7. abcdedd

    Fuel system layout

    thats fantstic james, thanks alot, so ill probably use the 300tdi filter and housing as ive got spare filters laying around, it has two connectors on it, one running from the right hand side and one on top, is the one on the right for the connection FROM the lift pump, and the one on top for the...
  8. abcdedd

    Fuel system layout

    Right guys, wondering if anyone could help me out, on my new truck build ive got a 300tdi engine, but ive put the manual injector pump on it with them lift pump and the option of a 200tdi fuel filter& housing or the 300tdi fuel filter & housing. Which would someone reccomend, as the old...
  9. abcdedd

    Ooops, Lost me Landy ... :(

    A group i know from the college i used to go to got stuck in a ford the other day yes, much deeper than they were expecitng, ill try and find the photo
  10. abcdedd

    Ooops, Lost me Landy ... :(

    Was that "shuttleworth college" by any chance?!
  11. abcdedd

    Bulkhead mount

    Ahright fair enough, although its not a thick metal, so leaves me wondering, when using a piece like this, does it require the bottom of the bulk head being chopped out, or ground back to clean metal for this to then be slotted over the top and then welded?
  12. abcdedd

    Bulkhead mount

    Its weird, they look like they are only held in by the hinge bolts?
  13. abcdedd

    Bulkhead mount

    Ah, just found the bulkhead feet, i assume this must be the part i need... They look like they are bolt in and out?!
  14. abcdedd

    Bulkhead mount

    Its what sits next to the outrigger that the long bolt goes though, mine is quite rotten and could do with renewal..
  15. abcdedd

    Bulkhead mount

    Hi guys, wondered if anyone might know.. on the bottom of the bulkhead there are the little mounts that the bolt then goes through to connect it to the outrigger, wondered if these are replaceable? 1992 plate defender.. If they are replaceable, anyone know a part number or anything...
  16. abcdedd

    braided Break hose connectors

    Yeh i want to route them in a different way though so dont want the normal ones but thanks anyway mate
  17. abcdedd

    braided Break hose connectors

    Hi guys, Anyone any good with Braided brake pipes? i need to make some up but confused as to what connector i need for the calliper end for the front axle, its a G reg defender 90.. anyone got any ideas? And also if anyone has any suggestions on supplier that would be great! Thanks...
  18. abcdedd

    Timing belt OE, OEM, Britpart... SO CONFUSED

    Hi guys, trying to purchase a timing belt kit... Im very confused by all the lingo and am stuggling to get my head round it even after a search... SO, if anyone could help me out please? Ive heard that its deffinatly best to completelty avoid Britpart parts, i assume this means their...
  19. abcdedd

    Whaddon

    Would be more than happy to go help pull him out if my rebuild was done :/ sorry!
  20. abcdedd

    We will give you £20* if we can't beat your best car Insurance quote!

    Build will be finished this month so will be sure to ring!