Go to your local motor factors they will have some pipe and a bleed nipple im sure, it may be a bit tight to go over the end of the nipple you can put the pipe in hot water to soften or smack it with a hammer then it will push over. The eazi bleed kit works better than pumping the pedal and...

Buy a tent simple, hook a caravan on.:D

Why not just buy the correct tool it's not expensive.

Can you get in with water pump pliers?

Also pull the ladder up so the lions can't climb up...........:cool:

Simply run a new wire to the chassis and fit to dash gauges.:D

You have 180 grams of weights on one side of that wheel is it buckeled? Don't put it on the front it will never be right and will shake your arms off.:D

You need the sniff test to tell if the head gasket has gone & is the cooling side all ok fan ok? thermostat working? water pump ok?

Angle grinder and cut it off.

Is the radiator hot? I suspect the gauge is faulty but do make sure it's not overheating first.:)

Sealey Manual Tyre Changer | Workshop Equipment | Tools & Workshop | Motorsport Shop | Demon Tweeks Are they any good? my old walk around that uses air is getting a bit tired now breaks the bead ok but clamping down is getting weak

On the mag mount the sheild/braid of the coax fits to the metal body inc the magnet on the other types that fit through the roof yes inside you will have to make a good earth for metal to metal contact otherwise your only using the centre core of the pl259. A dipole uses 2x poles inner and...

For the disco they make a bracket that goes on the spare wheel carrier can't you make something similar or just fit a mag mount which is the easiest option.? It's deffo a grounding problem once you sort this out you will be able to adjust the swr correctly and the cb will work as it should at...

Have you got a good earth for this aerial were is it mounted what type of aerial is it? The coax is it new is there a short have you checked with a multi meter? Anything below 2 is fine 10+ sounds you may also have it on the wrong setting which meter are you using? is it a power/swr meter?

I have worked on diesel engines that have covered 400k and still run your 150k is nothing so long as you change the engine oil and filter regular not every 12 months at 15k more like every 5 months at 6k it will run nice and sweet. Neglect is what kills an engine.

Yes i have seen your photos but they tell me nothing. Now it's time to investigate go back and read my post.

First of all get to the basics have you checked the fuses? Does it get a live feed? Have you checked the plug connections are they clean rust free? Has it got a good earth? All it is a diesel heater a simple glow plug fires and heats up the coolant we have them here at work in much...

For the antenna to work correctly it needs a good earth known as a ground plane. You can run a thick wire from the base of antenna off a plate etc to the body this will do and adjust antennna correctly swr wants to be lower than 1.5 to work at it's best, but 2-3 will work just not over a long...

Antennas CB - Radioworld If ever you get stuck for cb stuff these guys will help you down in the midlands there is loads of ham radio shops through the uk that will help too, i have used these guys before countless times there very good.

No need to spend £100.00 notes on a new one when there is plenty of used ones on e bay, might be of no use to you but the amount of landys with them fitted shows there of use to plenty of others! pointless fred? Whats fred?