the rf reciever i would get from your local main agent though it pains me to say that :) , for the cats try here Find RANGE/LAND ROVER P38 V8 CATALYSTS CAT,CATALYTIC(EXHAUST on eBay within, Range Rover, Car Parts, Cars, Parts Vehicles (end time 15-Oct-07 08:49:24 BST) they seem very competative...

hello mate sorry to hear of your troubles , although a great car when they are running well they can unfortunatly be an expensive pain in the arse when they go t*ts up, tbh i would take much notice of the "engine dont sound right mate" comment if its running ok and no issues with oil or water...

hi and welcome to the site mick , i see the spending has begun already , be warned mate it gets worse , much , much worse :D :D :D . rick.

no they are definitely aerial leads mine was exactly the same . rick.

yep just the same as mine was , i also bought my adapter lead of ebay and it worked a treat ( just be sure all the connectors engage ok though when you plug it all together ) mine pushed one out and sounded crap :) but it was soon sorted . rick.

its a shame , but i was thinking exactly the same as you mate . rick.

your quite right nicky 2 aerials not a clue why :confused: , mine was a clarion head unit and although it worked fine i decided to change the whole system for a more modern sony system , i just used one aerial lead ( dont rmember which one ) but it works great and no reception issues at all

how far is the range on yours mate , mine will operate no problem at 20 metre`s thats plenty for me , and miles better than the old classics which half the time you had to shove the blipper thingy half way in the car :) . btw mine`s a 97 hse . rick.

your spot on model man the later type are a better option mate. rick.

no mate they didnt , but i left the ignition off and i had the tailgate top and bottom open all the time i was doing the job ( not sure if that matters though some say yes and some say no ?????? ) also i didnt allow the axle to drop all the way down on its travel , just enough to work and get...

hello mate , not the way i change air springs but it may work ok for you . the easiest way i found was to raise the car on a trolley jack under the axle ( front or rear which ever you chose to do first ) then support it on a pair of proper axle stands , not the cheap nasty items they sell in...

hiya before jumping in with two feet and fearing the worst , do the basic checks air flow to start with , your air filter is it clean ? then go on to induction hose`s make sure there are no obstructions , or they are not kinked any where , you say you have replaced 2 of the hose`s are they...

no mate not standard , standard ones are a cast iron affair , what you have sound like stainless headers . rick.

hello mate , forget flushing your radiator put a new one on it , they arnt expensive , all the flushing in the world wont move the scale that builds up in the tubes , also check the bleed hose that runs from the top of the radiator to the header tank , at the same time make sure the nipples the...

thanks for the reply eight` i am certainly not looking for breakneck performance it was the bit about lpg conversions , and the fact that this chip is supposed to stop the engine ecu from going into "limp mode " due to getting confused by running on lpg , personally i`ve never heard of this and...

if i was you lenb i would heed wills advice or you may just end up in a world of sh*t ;) . rick.

i dont reckon you have any problems with your brakes abs light wont extinguish until you are doing 7kph , and occasionally my lights stay on for around 8 secs or so before they go out this also used to happen with my soft dash lse 1995 model . rick.

surely someone has got some veiws or experiances of thses chips :confused: . rick.

hi all , i wondered if anyone has had any experiance`s with chipping a gems p38a 4.6 . rpi engineering are selling chips but at around £700.00 they arnt cheap , they claim they are a must for lpg powered p38`s but is it just sales patter ???? they also claim that it eliminates the vague...

what year and model classic is it ???? from memory it should have a mechanical switch operated by the brake pedal its a plastic one , but ive never had any trouble with them when i had my classics. rick.