1. M

    Disco 4 (LR4) 2010 disco red triangle on reverse screen only.

    Hi, Can anybody point me in the right direction. I have no codes when reading with my icarsoft diagnostics but have a red triangle with exclamation point on the touch screen when I go in reverse.
  2. M

    Disco 4 (LR4) Removal of Central Junction Box

    Hi Fellow landy owners, Whilst tracing wires to the Central Junction Box for a Seat Memory problem I came across water in the wire loom channel on the passenger side. I checked the sunroof drain as per youtube video and the rubber nipple under the mudguard has perished and dropped inside. Is...
  3. M

    Disco 4 (LR4) Restricted Performance code P2263

    Hi Gary, Your reply is blank and if I try and go to the links via the email I get landyzone error. Regards, Mike
  4. M

    Disco 4 (LR4) Restricted Performance code P2263

    Hi All, Please help. My wheels are challanging me. I was traveling on the freeway at about 85 mph when my 2010 Discovery 4 3.0 TDV6 went into "Restricted Performance" and I lost the sharp end of the normal power. When I was off the freeway I stopped and switched off. 5 minutes later I started...
  5. M

    2010 D4 3.0 TDV6 Rear hatch door only unlocks with remote

    Hi Lynall, Thanks a million for that link, it helped me no end. The problem was the thin wire from the micro-switch corroded in the insulation just as it entered the plastic sleeve that hold all the wires together. Re-ran heavier wires now working fine without remote. Thanks again for your...
  6. M

    Disco 4 (LR4) Seat Memory not working on 2010 discovery 4

    Hi Thanks for the feedback. The red LED is it on the keypad or Module under the drivers seat?
  7. M

    Disco 4 (LR4) Seat Memory not working on 2010 discovery 4

    Hi again Gstuart, Rugby over. So results of what you asked ;- 1) No DTC codes 2) Nothing happens when I try to program. 3) Fuse 40 and 42 both OK. 4) Don't think my Scanner can see settings in CCF files. (Really not too sure how to drive the scanner ) Scanner info that I was able to get Data...
  8. M

    Disco 4 (LR4) Seat Memory not working on 2010 discovery 4

    Thanks will have a look tomorrow. Bit involved in World Cup Rugby today.
  9. M

    Disco 4 (LR4) Seat Memory not working on 2010 discovery 4

    Hi Gstuart Thanks for finding me .Again you are helping me. To answer you questions here goes;- 1) 123 and M on RH door. 2) Mirrors drop on reverse. 3) Memory not working with any key. 4) I have an i-Carsoft 930 Code Reader. 5) I have a multimeter and know how to use it. 6) I do all my own...
  10. M

    Disco 4 (LR4) Seat Memory not working on 2010 discovery 4

    Thank Lynall for the interest shown on both problems. Will try and get the interest of Gstuart for the seat problem when I can work out how to do it.
  11. M

    2010 D4 3.0 TDV6 Rear hatch door only unlocks with remote

    Hi Lynall, Thanks for the info. Ihave had a look at the youtube videos but don't understand that the solenoid works and operates the latch with the remote. If the solenoid was weak or cable detached the top tailgate would not open. I am thinking it may be a relay or broken wire. Any comment?
  12. M

    Disco 4 (LR4) Seat Memory not working on 2010 discovery 4

    Hi All. Does anybody know if there is a common problem with the seat memory not working. The seats do what I ask with the switches on the side of the seats but not with the memory switches on the door. Any suggestions to guide me in the right direction would be appreciated.
  13. M

    2010 D4 3.0 TDV6 Rear hatch door only unlocks with remote

    Hi Landy people. Can any one tell me if it is normal for the rear hatch door to only be open with the remote. I can hear the micro switch click if I try to open it with the handle but the solenoid does not activate. I bought the vehicle like that so do not know if it is normal.
  14. M

    Pierburg EGR valve removal on 2010 discovery 4 3.0 TDV6

    Hi Grandpa (Although I think I am older than you) Thanks for all the leads. I have found a place that will remap and delete the EGR s. Looking at the Blanking Plates they look the same for the D3 as the D4 can anyone confirm that for me?
  15. M

    Pierburg EGR valve removal on 2010 discovery 4 3.0 TDV6

    Hi D3 Grandad, Thanks for your feedback and interest. I am not 100% sure that it is an EGR valve as the code it throws does not appear in my WS manual P042F-77, however it happens after the car has been left in the garage for a few days. When I first start it up and reverse out it pops up...
  16. M

    Pierburg EGR valve removal on 2010 discovery 4 3.0 TDV6

    Hi All. Crying for help again. I want to remove and clean the EGR valves but am finding it near impossible to get at all the bolts and screws to get them off. I have looked on the internet and see that there is a youtube video on how to remove but I don't think that they are the pierburg...
  17. M

    egr blanking or emulator

    Thanks guys for the feedback. The code I am getting is P042F which is egr stuck closed. I am in South Africa and I believe that the Discovery 4 was exported without DPF's. Mine does not have a DPF so is it ok to blank the egr without any harm?
  18. M

    egr blanking or emulator

    Hi all. I have had enough of egr problems on my 2010 Discovery 4 3.0 TDV6 and would like to know which would be best blanking off or installing an emulator? If emulator where could I purchase one.
  19. M

    Disco 4 (LR4) 2010 3.0 TDV6 Fault code P042F EGR valve stuck closed

    Hi Guys and Girls can anybody help me I had P042F pop up on my Discovery on streaming data with the engine idling I recorded the following :- EGR valve position bank 1 3.92% EGR valve position bank 2 3.53% EGR error bank 1 94.99% EGR error bank 2 94.99% The problem I have is which EGR valve is...
  20. M

    Disco 4 (LR4) Restricted performance

    I have a 2010 land rover discovery 4 3.0 tdv6. Yesterday I was travelling on the freeway at 100Kmh the car started lurching and went into Resricted Performance. I pulled over to the side the car immediatly stalled with a big clunk noise. I tried to restart but the engine would not take and a...