Just to put my stamp on this. I have now worked out that my little amigos don't come on if I start the car with my foot on the brake pedal. I don't know if that signifies anything or whether I just need to get out more

Mrs using the Hoover

Sounds like a plan. I stick some pics on before and after

Just checked the red plug again after an hours running and there is more oil there. Obviously still coming down the wire so it will be a case of cleaning up a few times I think before its cleared. Found out though that the three amigos and the M&S lights are on until I clean the connector and...

Great. Got the compressor so I'm half way there. I'll have a look for a gun on eBay now. Thanks for the help

Nice one bobupdown where is the best place to get one.

Sounds like fun. Cheers

Hi Kernowkid. I bought mine through RST which sell on eBay. Ordered the loom and the gasket in the morning and it was on the doorstep less than 24hrs later. I think the loom was around £27 and the gasket was £8.44 all free postage. I took I would say about an hour to change but that included...

Thanks for that, that's explained it brilliant. It's just where do I go from here. The annoying thing is not being able to test drive it.

Is that the stuff you heat up first?

Thanks sierraferry I'll check the vacuum pipes tomorrow when I'm working on it. What's the EBD?

Just changed my loom today. Started of changing the top hose, then thought I might as well stick an egr blanking kit on I had in my garage, then thought I'd check the loom only to find oil at the ecu. So cleaned it all up. Now the M&S lights have gone out so to have the 3 amigos. Not sure if...

Ive just changed the discs and pads on the front of my 04 discovery and now the pedal had gone hard. I can't drive it down the road to bed them in as I'm in the process prepping it for its MOT. Could it be there is now to much fluid in the reservoir? Any ideas disco peeps.

Cheers zuggy. Defo going to do that.

Why

Cheers robbew86. I've pressure washed the hell out of it today. Is it worth painting first before the wax just to tidy it up?

Hi all. I've just bought a Disco 2 as my Defender chassis swap is taking a tad longer than I anticipated so I need a tow vehicle and winter round the corner I need another motor. As I'm not one to pay full whack for anything I bought one which needs a few jobs. Nothing to major (I hope). There...

Thanks for the replies all. But would the outside temp sensor make the viscous fan cut in. Also if the battery was dodgy would it die then seconds later come back to life?

Hi All. My 2007 4.2litre supercharger has started to have the fan kick in on start up from cold. Then go off after about a minute. Then when you've been on a run or sat waiting for the missus to pop in a shop as she says(and I don't know if this is a coincidence) but sometimes when you turn it...

Looking great mate. It's coming on now and has given me a bit of a kick up the A**e to get on with mine. Been buying a few bits over the past few weeks so now need to crack on. If it looks anything like yours when I'm done I'll be a happy bunny. Keep up the good work.