Well what a bloody Nightmare this is. Problem with Headlights again but think I might be able to sort that. Anyway It was a bad connection on the passenger side indicators where it joined the wire on column stalk in dash. wire is now good from front to rear Now I can get all 4 corners working...

Got a mate with a bench grinder and wheel gonna drop them off for him to polish up.

I can check both ends to where they enter chassis at each end so if its inside chassis can't get to it. How do I check with meter ?

Just about ready to fit these military lights once I get wiring finished.they have been painted over so do not look there best, sand paper is getting it off but will take bloody hours. Anyone know a better / easier way to get them back to shiny

Not sure as testing these ones with test bulb on hanging wires, , it works on both rear sidelights and Drivers Indicator but Not Passenger .

Yes that was already done and only got the 2 fronts and drivers side rear to work. Bit of progress now though, there was 2 R/Bs at drivers rear and only 1 at passenger, when I joined these 2 together at drivers rear I finally got passenger to light. Now I have all 4 Side lights at each...

the red on the driverside should be connected to the red black at rear that works tail lamps . Sorry which Red do you mean ?

Which Red on drivers side? There is no reds coming out at rear.

Thanks You. will get these tidied and taped up, This is what runs through chassis to rear. R/B R/Y G/R G/W G/P I know what each wire is for from your previous help. Drivers side First Pic, With Test wires and bulb I can get indicator and sidelight to work, the side light only works off...

Ooops Sorry Mate think I need new glasses

Thanks Ordered those from ebay tried suppliers but they only have the right hand side one no one has the left for some reason.

Right I now have it Same as you are doing main beam on when stalk full forward when pulled toward you dipped beam and flick toward you flash Was confusing trying to guess by reflection as on my own, but found out the passenger headlight was wired wrong when it was on high beam the drivers...

Now i could be wrong here with mine as on my own when testing trying to work it out on the reflection on car in front of it. Will wait until someone comes up to verify what lights are actually doing, but Yes would rather have mine your way but can't get the bloody flash to work on mine with...

Could be the wiring in my loom that's out of place as there was lots of extras added for the military stuff. Should I leave it as it is now or try something else ?

Just a quick one, The Bonnet I am using has these hinges first pic, but my bulkhead has these fittings second pic, is it just a matter of changing hinges ? Will these do ? Land Rover Series 2 - Bonnet Hinges - 336476, 336474 | eBay Thanks

Just a quick one, The Bonnet I am using has these hinges first pic, but my bulckhead has these second pic, is it just a matter of changing hinges ? Will these do ? Land Rover Series 2 - Bonnet Hinges - 336476, 336474 | eBay Thanks

Well its working as it should but not sure if I have done the right thing. So I tried joining the thick UW to the thin UW on driver side and the thick UW to the U on passenger, still the same, tried swapping the yellow earth on H4 for black but no change. What I did was this. the UW that...

Yes Black goes to number 8 on light switch. Tried joining the B/Ws together but Still the same, Checked and Double Checked all connections and all correct but Still the same.

Yes it goes from drivers to passenger in an arc, is joined in connector to the B Both ends just taped up going no where at the moment. Should I join to thin UW on Drivers side then same again at Passenger to B

Each side has 1 Thick UW each but none of the wires worked off them, no power in them. the BW on Drivers side that I used was Thinner