Just seen this before I left, didnt have time to check any voltages but did swap Yellow and White at Stalk and now seems to be working as it should, Forward Main, Middle Dipped and flashes with lights on or off, then again it has a mind of its own when O go up tomorrow it could be different, but...

Well done Exactly as above but Still No Joy now still at stalk Forward Dipped. Middle High. When flicking towards for flash Still will only flash with side light's or No light's, Not with Lights On

Great Thanks So Drivers side, the 2 U/Ws joined and connected to Main Beam Black wire on H4, and the U/R to Dipped Beam White wire on H4? Pasenger side. U/W to Main Beam Black wire on H4, and the U/R to Dipped Beam White wire on H4 ? Yellow Earth Discard the U and make safe. Or...

BLUE is connected to Yellow at Stalk and the other U/W s then to one of the B/R s at Stalk.

Preety sure That thin U/W goes up in to dash and is joined to another of the same coming out from dash then the others that go to one of the B/R s on stalk, will confirm tonight

So wires marked in these pics connected to wires marked on H4, do I have to join any together ?

You were right Mate the brown was not connecting the U and UW changed the connector and now they are joined. On the H4 I have yellow Ground is White Dipped and Black Main ? Going to look back over the posts again to see what goes where again as I disconnected wires at headlights.

Yes know what you mean, think I might have a connector, if I don't have one should I join them together ?

Well these wires are a right mess, couldnt really tell what went where as when I started taking tape off some of the wires have been extended but with different colors where they were joined, Right hop you can understand this lot. In Dash U goes to Yellow, on column stalk which is joined to...

Yes I am certain I have it that way, but will double check tomorrow. Just to make sure where I have them now, Stalk Full forward it is in High Beam ie as if you were blinding someone coming towards you, Back to middle, Low Beam as in normal night time driving, Think I must have one wire wrong...

Thanks will do that. Bloody Headlights . Well can you remember when I changed the wiring from the Yellow and White coming from Stalk, and I was Adamant that they were working properley, Well I was Wrong Again, I thought I had them. with full forward High beam, back to middle low beam, then...

Yes forgot to tell you that when I wired up this way the warning lamp was on constant all the time with Indicators turned off. but flashing when Indicators turned on, Using it for now to set things up. Got all lights working now except for 2 Indicators which I need those parts for, Still got...

Wil order 2 of these then, wil this flasher be ok ? as can order from same place. CLASSIC MINI INDICATOR FLASHER UNIT MK1 GFU2103 59-67 DELUXE COOPER 1071 998 7B1 | eBay

Thanks will leave them at top on rear. Thanks for link, just wondering if they will fit in to the rubber sleeves

Think I will order a couple of these to save all the hassle , Land Rover Series Military Screw Lens Side Indicator Single Pole Bulb – embertonimperial that rusty one in pic might work if I clean it up. Something that I noticed was On the ambulance the front Indicators are on the bottom and...

Thanks will order one of those you mentioned, but will use this one untill it comes. Another thing the side light and indicator connectors, I am 2 Indicator connectors short. the 2 brake lights at rear are double fitment for the bulbs, but the Indicators are single. but the 2 I need single...

Thanks Do I need to Earth it ?

All my local shop had in was this cheap one. , It works the Indicators but depending where I put plugs can only get either working with warning light on in cab and no bulbs working outside, OR bulbs flashing outside and no warning light inside,

Thanks sorted wires got all 4 working on test bulb But when plugged back into Flasher there is nothing no power no noise, do you think flasher us knackered with all the testing ect ? It is a brand new Lucas