OK That makes sense. I will see what happens tomorrow

Thanks I will try that tomorrow I have found the relay and I haven't been under the seat before and it wasn't on its mounting. I was about to remove it and the case came off. That's not the issue but it's more for information. Could the relay be at fault? Not sure what impact this relay...

OK Thanks for the information. Do do suggest pulling it before I turn off the engine or after? I only ask as it seems to drop fairly quickly after turn off

Hi Everyone My P38 2.5TD is running and has 200k on the clock. My issue is that my eas system will get to height and be fine. It will hold pressure for two or 3 days or more without any problems. I've checked for air leaks and I have nothing that I can see. The main problem is the air...

Thanks I appreciate your help

No the sensor has not been replaced but I did move too many floor tiles in the back and I believe it could have bent the bracket (not yet looked) as I'm an old disabled military veteran and need dry weather as I'm doing it outside. Is the procedure correct Unplug the c117 socket fix the...

Thanks for the comments I'm not here to bull anyone and if by highlighting my mistakes I help someone else then they learn from my c*** up. I've managed to id the problem. The RR sensor says signal incorrect. I believe i have to unplug plug c117 and then rectify the sensor and then plug it...

Update on the issue of my p38. I've managed to sort it myself. I feel a bit embarrassed, I picked up the wrong obd11 cable and continued to try and sort the problem with the wrong cable. I only realised my massive c*** *p when I suspected the cable and started to look for another to then...

Brilliant Thanks Will any other devices do the same as the nanocom

Thanks for your messages. Just an update as I should have said. The obd connection is clean and is not corroded that I can see as I replaced it not so long ago. I will look at the map and see if I can connect with the two guys. I didn't know about the fact that any work with the eas...

Hi I need someone with a nanocom for my diesel who lives in Preston and is prepared to come to me to reset my EAS system. I really need it as I'm a disabled military veteran and the car is my independence. I have a p38 diesel 1997 auto and the Eas has thrown up a problem. I have tried to...

I've installed the drivers and tested the communication again and I still have the same problem Any ideas

What is the correct driver for the system D2xx, D3xx or vcp Please help as I'm out of my depth here

Windows updated prior to me connecting it to the car. How will I remove the windows usb-serial driver. Where will i find the correct FTDI driver. Sorry to be thick ...... lol

Hi I bet this subject has been chatted to death but I can't find my exact problem. I have used the software before with this equipment successfully I understand how to get it to communicate with the car. I have connected it the correct way and pressed initialise to then get this. I'm...

Thanks for the information. I know that the egr version has the mesh and the pin prick hole but I'm not certain about the none egr version. I'm told that the breather is referred to as a depression control valve (DCV) The problem i am having is the plastic pipe that connects to the DCV on...

I have a p38 dse none egr version. The cam cover breather has a problem in that the rubber grommet that the breather goes into the cam cover is not feeling well if there is a grommet? In addition the breather needs cleaning (what is the best way petrol, brake cleaner or paraffin bath) and it...

Thanks for the information but we managed to get a recovery company AAA Road Recovery Leyland. Ed is a great lad and his support vehicle worked very well. Thanks

We have been here all night Please help

No longer needed Thanks