LPG tanks and brackets coated in raptor ready for fitting on Wednesday. Sprayed in a fiends paint booth at 30 degrees.

Been busy preparing my LPG reinstallation! Originally it was a right bodge job from the past. Terrible fitting of the tanks. So I've got some new tanks, brackets and everything else. Popped into work today and welded some long bolts to the new brackets so I can fit the tank and both brackets in...

So after looking at the prices and condition of the second-hand scuttle panels I decided to buy a brand new one! I also got all new fixings,blanks etc I fitted some stainless mesh over the new foam filter and installed some modified clips in gloss black. Hopefully this will prevent the foam from...

Nice high quality brass coolant bleed screw fitted.

Thanks mate :)

Finished the camping rear door project! Knife, axe, fire extinguisher, handle, bottle opener, fold out hook, 18mm marine ply stained black and sealed with many coats, quick release button fixings, slow drop down gas struts, stainless hinges and fixings etc What do you think?

Upgraded my number plate lights to led.

Got the other side done on Saturday and jet washed/cleaned all of the underside ready for lanoguard on Wednesday.

Finally picked up the other side, a genuine land rover fog light.

Made a start on the rest of the rust prevention that I had to cut short when doing the chassis. Wednesdays task was the passenger side sill and floor. Stripped all the paint off and removed any surface rust. Degreased and then gave it 2 coats of corroless qdr. Drivers side to do...

So I noticed a a bit of pink coolant on my oil filter and my new panhard rod. Upon inspection I found the water pump to be the culprit. This was probably the only this I didn't change when doing the engine. The previous owner said it wasn't very old and looked great so I left it. The cost was...

So just completed the landy's first proper adventure! A week away in the Cotswolds with my family. Travelled 634 perfect fault free miles and even worked out my MPG after all the mods etc. Very happy with the results, on a run on motorways etc over 201.65 miles I managed 20.49mpg and that's with...

Ah a custom job! Nice one.

What ones did you buy mate?

Fair enough mate. Might knock one up myself at some point.

Why not stainless or aluminium mate?

Also finished and installed my torque pro phone mount I made from oak. I decided to stain it black. My main screen is set up to display my GPS speed, battery voltage, gps trip, total gps trip, intake air temp and coolant temperature. I have it set up to show that my coolant temp is cold by a...

Fitted my panhard bar and Adrenalin 4X4 HD steering arms this Saturday. Aligned both axles and set the alignment to toe out 3 degrees. The previous set up was toe out to 1.5 degrees. The spec is 0-10 toe out so I went for 3. It feels better than ever and now my steering wheel is straight again...

Painted my track rod ends ready for fitting on friday along side my finished panhard rod :D

Yeah originally it was going to stay light coloured but now having different ideas. I have seen the mod but not interested in doing any stereo work atm.