Nice one I will go see what they got. Thank you much appreciated

No worries there I took notice of thread length when searching on paddocks. All the ball joints are full length thread. Appreciate your help

Thanks again sir. Is Blanchards the place to use for parts or are they like Paddocks and Craddock where one has some of what I need then the other normally has the other bits I need! Really appreciate your help sir.

Thank you, yeah I found that out by accident when trying to screw ball joint in, I scratched me head for about 5mins then tried other way! Boy was I happy when I did lol. Appreciate your help

I could do with some help on this part I’m having trouble finding. In the picture I have ringed in blue the part I need, it is part 42 in the picture which is the ball joint/ track rod end! The part number is 231184 but when I put this into Paddocks or John Craddock it’s not recognised. The...

On each side of the front panel is a hole for a rubber stopper to help with the rattle of the wing against the front panel.

Not mine but this is the front panel.

Hello all, the front panel on my series 2a 1971 is missing the 2 x little black stoppers that go each side of the panel. Has someone got a couple of spares or do anyone know where I can get them from please? I have just asked Paddocks spares and they say “NO”

Appreciate you letting me know @Rubins4

Hello @Rubins4 can I have the 2 x inner wing mud flaps and the 2 x vent flaps seals please also what else have you got for a 2a 88 thanks Trumar

Afternoon discmikey, I read that you adjusted bulkhead, apologies for being a pain but how do you adjust the bulkhead please? I have just had new door pillars and and door sills fitted I’m not to sure how to line up the bulk head, doors and front wings with the rear tub? Thanks Mark

Thank you I will start looking for the inverter mig welder. I’m really glad I asked on here about welding as I thought a welder was a welder! Thank you for your help

And I thought I done good getting galvanized parts lol. No worries I will not be buying galvanized again. Appreciate all your help Col I will let you know how I get on!

Thanks Andy J. For showing me this video it is the best one I have found on YouTube he does make it all look easy lol. But he’s not fooling me lol.

Glad I asked you now. I couldn’t stretch much further on a new welder so I will look for a secondhand welder. I think I shouldn’t need to keep sending screenshots and asking you is this any good! As most of the secondhand welders are old so should be a lot better just thought of this question...

I haven’t got a compressor I could possibly borrow one! I watched a video last night and the man making it had drilled holes all the way down the new door pillar, now I understand why! Thanks to you. I took at screenshot of this mig welder I know it’s cheap compared to other mig welders but...

Thank you for the info I do worry that setting up what needs bead welding and what to do if I have to spot weld like the pillars! I have noticed there is no beads down the length of both sides of the pillar so I’m thinking that this has some other way to be held together like is this spot weld...

Need so advice to help me work in my garage. My garage where my series 2a swb 1971 is parked is to far from my house to run electric. I only really want to run 2 x led ceiling lights so as I can work on my truck in my garage when ever I want. Does anyone know of a power inverter that I can...

Getting carried away is what I’m worried about lol. But understand what you are saying about the prep work.