I did some testing today, with a T and a Schrader valve on the 6mm pipe direct to the tank. I filled it to 110psi and I was able to raise it straight to the high setting with no fuss. Left a door open, and measured all four corners and let it sit for 4.5 hours. Front and Rear passenger side =...

I think I've blown my EAS pump again. Repaired it about 6 months ago, and EAS worked perfectly, but today it refuses to raise. It was working perfectly the other day, and I drove with the tailgate open. EAS was therefore disabled. About 15 minutes into the journey EAS fault message pops up...

Let me know if my private message fits the bill

Sometimes manufacturers keep sloppy records. Porsche are terrible for loosing CoCs.

What shocked me (that pun really wasn't intended, but I'm leaving it) was how little current it takes to kill someone. Between 0.1amps and 0.2amps. I'm glad we have a fairly high internal resistance otherwise a toy car with 4xAA batteries could easily be deadly. I don't know if it stands up to...

I bought a second hand wheel as I wanted an upgrade so all being done off the car. Already stripped the buttons down. Just waiting for a warm before before shooting 2k clear on it.

I'll be doing mine soon. One of the things he says in the video is to lacquer the plastic after putting the decals on. How you would deal with the overspray I have no idea if it's in the car. Without lacquer they will surely just peel off from use and friction. What I don't understand is how...

Last option is to just make one, but what I'll probably do is cut it off the old wheel. That way I can cut off a big chunk of the plastic surround to increase the contact area for gluing.

If anybody has a scrap steering wheel, I'd be grateful if you could try prying the plastic thing off, and tell me whether it popped off, or smashed broke apart.

fair

That's what I assume they are for. Not finished restoring it yet so not pulled the old wheel to confirm.

I'm restoring a steering wheel to replace my old tired one. The one I have has a plastic lug missing as shown in the image. When I bought it, I was planning on just swapping the whole black back piece from my old wheel, but I can't for the life of me get it off. Do I need this plastic lug that...

Way too time consuming based on how many posts are wrong and would just generate loads of noise for the mods to deal with. If you've ever used stack exchange forums they are managed by site users and it works really well.

I spend a lot of my time in the Range Rover section and there's loads of posts where the title doesn't include the car type, e.g. L322, P38 etc. My mild OCD would love to occasionally fix them all so I don't keep entering a post I actually don't care about. Could long term users be given the...

I wonder if Audi ever wonder why they are selling so many heater cores? They may think it's a dodgy design they have.

Has it always had a lumpy idle in your ownership. Wondering if the previous owner fitted uprated high lift cams. My rover V8 is lumpy at idle die to the cam.

I did my passenger side the other week. Removed the airbag, drilled a hole to unscrew the duct, got angry with the air duct and finally got it out of the way. Cut the cable and re-solders the potentiometer. Reattached with a choc block and works fine now. Planning on doing the drivers side soon...

Really useful document.

Linking here as a handy note: https://landyzone.co.uk/land-rover/android-installationinstallation.334009/ Thanks

As I understand, with the android units you can tell it what the steering wheel buttons are so they can work with any steering button on any car. Unless I'm missing somehting. As for line out, I've not figured this out yet, but sounds quality is quite low on my priorities. I think I'm unusual...