RST are well established and decent to deal with Owner Rodney is a friend of a friend

I just ordered part AFU1234 and they were fine They don't need to be high tensile so if you've found an M12 bolt that's doing the job' I wouldn't worry on it

This is some of the keenest prices i've found RUST PROOFING - Underbody waxes

Not Pikey's, but 2nd post in attached might help http://www.landyzone.co.uk/lz/f7/rear-tub-mounting-points-242631.html

Pikey i think has posted on this several times pm him if a search doesn't fin

Glass first and plenty of washing up liquid Guide here (although i bottled it and paid an indy fitter beer money to do mine) Defender windscreen removal & replacement, - Land Rover Technical Archive - LR4x4 - The Land Rover Forum

I used the dinitrol 6030 aluminium metallised filler on mine Dinitrol Metalised Body Filler, Dinitrol 6030 Pyrmoplast Aluminium | Frost Auto Restoration Techniques Been pleased so far

Not sure of the make, but if you go into Paddocks website and find their swing away wheel carriers, they have a link to download the instructions Will probably be similar enough to help

Wondered if Rutland Red from the seat box Land Rover Addict Forums

Gutted for you - fingers crossed

Pretty much as you describe Along chassis rail and then up by bellhousing where you will see from inside the cab oval rubber grommets either side of the fuse box which you can use Best route from battery box is to follow where the leads already exit

Run LR Original, I think Honda and Smith & Allen in mine - not noticed any difference They should all be to the same spec, and suspect some will be the same just 'branded' differently Smith & Allen in mine for last 2 years

Please get some more input on using EP90 I know it's not recommended for the R380, not sure what damage it can cause but thought i read somewhere about it being too thick for the integral pump to handle and can lead to gearbox failure

Yep Has increased a bit in price from when I last purchased! Smith & Allen's ebay shop has it for £35 incl delivery!

Really wouldn't put EP90 in the gearbox - far too thick Try MTF94 to see if that improves

I'm must be missing something Tyres Direct

Just found their website states: 'We welcome all types of buyers from the UK and around the world. We are happy to sell individual vehicles or quantities' Is the issue more about Day 1 registration to make it road legal to drive? If you can't, borrowing a trailer might be the lower cost...

Hi Have you contacted Withams for advice? All their prices are listed as 'subject to UK VAT unless sold outside of the EU', but I don't know if that means you have to be a UK citizen in the first place

I'd certainly see them holding their value well (as they have over the last few years) which is more than you can say for most vehicles! Parts shouldn't be a problem - the number of Fenders still about 20 years + from Manufacture will keep the demand there, although over time some low demand...

Use a mixture of ratchet straps (think mine came from Screwfix) and elasticated straps with hooks each end Does the job Ratchet Strap - Search Results | Screwfix.com