My meter doesn’t beep

No the fuse box is fine only the relay smelled of burning I changed it but didn’t cure the issue

Ok I turn the key to ignition and checked pin 85 red to pin black to earth I got a reading of 1 ?

The other pins had voltage

85 and 87 have not voltage

Thank you for all your help, I will check voltage later after work Dean

Thank you for this, are you suggesting I shut the system down? If so how is this done? Kind regards Dean

Ok I just used the meter, pin 87 to pin 30 12.9 volts pin 87 to 26 12.9 volts and pin 87 to 85 0 volts

Ok I just used the meter, pin 87 to pin 30 12.9 volts pin 87 to 26 12.9 volts and pin 87 to 85 0 volts

Hello, not yet not sure which pins power the relay? I did notice when I jumped the pins 30 and 87 the warning light was still on the dash ?

Hi thank you for your response, the Range Rover was converted to springs before I bought it, breaks were working fine a week ago then nothing I have the red warning light for the breaks on and it flashes up abs fault, I’m not savvy enough to understand the electrical side unfortunately, and help...

Ok new relay fitted but still not fixed, the pump is not activating but when I use the jumper it’s working? Not sure what else I can try?

It’s black, 4 pin but one pin is narrow

I don’t have another relay like this one ,

I do have a meter, the relay smells like it’s burnt out, I will check the line as you say just in case

I have just jumped the the wire from 30 to 86 the pump came on at once

Thank you for explaining this to me, I will do this in the morning and report back

Thank you for the information, do you mean take the relay out then take it apart? Solder the contacts together?

Thank you, for response not sure how to do this jump wire, do I need to take the relay apart?