had it apart twice now, the rubbing only started with the new discs, there is an even gap all around the backplate, and all the fixings are ok, there is quite a big gap all around the back of the disc now, the reason i'm saying wheel bearing is because as soon as the vehicle weight is taken off...

just a quick question, is it possible to fit a front hub wrong? Silly question I know but bear with me. About 18months ago I had to have a new hub fitted as I had snapped studs on the old one, anyway the original hub was pushed into the metal dust shield at its rear so the outer lip overlapped...

any chance this is what you are looking for? http://www.maplin.co.uk/p/apple-lightning-to-30-pin-adapter-a30lj

hi guys i think i know the answer to this but just want to double check, i had a wheel bearing replaced about 18 months ago. anyway lat weekend i did a full refurb of the front brakes, with new callipers/discs & pads. anyway after fitting the brakes i noticed i had a high pitched scraping noise...

LR do a replacement bag, they are around £200 plus vat, you have the hassle of fitting it and still have a used shock absorber. For around £200-£250 ish you can get a complete strut. People say the Dunlop ones have a clunk over bumps, I've got a pair of Delphi units on mine, they were both...

leak free days in 4.5 years on my l322 probably about 4

ok just to finally put this to bed as there seems to be loads of other people with the same issue and no fix, i have now replaced the coolant temp sensor. and it seems to have cured the problem for me, so for circa £15 it's worth a try. part number for the temp sensor is 1703993, it says oil...

i always use brit-car, quick service, several makes of part to choose from and always good customer service. i usually find them ver reasonably priced too.

I'm guessing you have an l322, after my gearbox was reconditioned I was recommended an aftermarket cooler and not to use the OEM one. Mine is mounted onto the front of the rad, so far so good with no issues

well it seems even though the car is running better i still have the issue with the hot start, it's doing it if i start on LPG as well so ruled out fuel pump, not really mentioned in land rover circles but on the BMW boards it's full of the same issue and all pointing to the temp sensor going...

yes, i don't have any brake pipe making kit, but luckily i have a neighbour who works at a local garage so they do me a 'cash' deal, so i'll be taking it to them to be sorted. my other problem i found was one of my handbrake shoes didn't have a retaining pin, so the shoe was angled in the disc...

So as I was replacing my rear brakes today I did the hard reset, during that time connected everything up, started it up for 10 mins, went for a shower, came back still spluttering into life. Anyway took it for a long run on petrol. Decided to swap the heated seat and fuel pump relays over, to...

hi col, no evaporation on the l322, it's a direct rail injection system, which has the pressure regulator fitted into the fuel filter at the back of the car only real place they suffer is injector seals if they leak, but the cars been checked over and the garage couldn't find any fuel leaks...

yes i too have seen the posts but they all have cold start issues too, mine starts on the button on a cold start which is strange to say the least, i think first port of call is swapping that relay, and a pressure test on the fuel line. i think i may check pressures with the current relay and...

Plug & play I believe take a look here http://www.bluetoothexchange.co.uk/

That's my thoughts, but it's not struggling to supply fuel when it's running, I can floor it and it goes, and no issues when cold

You should have the Nokia Bluetooth unit there are upgraded versions available

hi guys still got my starting issues, been going on around 6 months now and still can't get to the bottom of it. ok so if i start the car from cold starts first time everytime no issues, it drives with no loss of power or any problems, now when i switch the engine off, this could be after 2mins...

Manual shows 3 lines there are only 2, 1 is for nas models, but yes on left side there is a vapour pipe, the valve is on the front of the engine, then pipe feeds upto throttle body. Checked a BMW site and only test is to see if the valve vibrates it's working. However unplugged no fuel vapour...

hi guys had an starting issue with the RR for a while as i've posted about previously. and over the last week after driving i have had a very strong smell of fuel under the bonnet, anyway took into my local garage last week and they checked everything, and found no fuel leaks but the small was...