Not a bad shout. Will need to be big to stop it flipping.

Spent 3h pulling 3 cables in through the roll cage. All the draw wires had melted them selfs together in one big mess from the welding.

I get 14mpg on my 1994 discovery

I'm building a roll cage at the mo and was thinking of making this front sticky up bit but I don't no what it's for. Is it to help protect the bonnet if you are upside down.

Check for 12v at the fuel cut off solenoid at the back of the high-pressure fuel pump. If u have voltage crack off the nipples on the injectors to get any air out.

Got the cage back on the disco and fully welded it on. Made and fitted 2 rear supports from the cage to 6mm plates welded on the chassis. Going to weld in the internal cross tomoz and start painting the new welds.

Did the last coat of painting on the cage last night. Going to get the lads round later to give us a lift so it can be welter on and start the electrics. Hopefully I'll have time to weld the internal in and get the support in for the chassis to tree sliders.

Why use loctite, you don't on the wheel nuts. I tightened them to the same talk of the wheels

Keyed the cage and put the first coat of black paint on last night. Didn't finish till 12:00 so getting my m8 Sam to do the second coat tonight as I go out for a curry :D

Structural I've got bits going inside for support as well

Finished moking up the internals for the role cage so I could finally take it off and fully weld it and start to paint it.

Hi can u give me a price for this bits inc postage to Leicester badge on the boot, 2 rear sun roof hinges, drivers door stop/retainer, engine fan cover if it's the same as a 200tdi Thanks.

Started the internals for the roll cage. Always scary drilling holes in your roof

Having a lift kit put more stain on them

FINISHED the main part of the roll cage. Well I say finished, the main part is all tacked together. Still need to do the internal brace behind the front seats, front wings, incorporate some defender headlights in the front of the cage to replace the 2 candles that I’ve got at the mo. fully...

The Sealey one looks good. Will weld the chassis with ease but if you'r doing a lot of welding I would get a big bottle of Gass and a reg to fit. The little bottles are a rip off. U will need a auto mask and a pair of welding gloves

Cart seem to put more than one pic on at a time. Maybe it's cus I'm using my iPhone.

Done a bit more work on the role cage. Rolled the light bar and made the other front part. Then got distracted and made a 15t

Isn't it easy just to take the gearbox out?

Thanks 5tox Got the 2 roof triangles finished today. Would of got Moor done but got distracted with my new oxy/propane torch. Cuts through 12mm steel plate like butter