1. Gaj1612

    vcu recon

    Is it just a case of changing the fluid in the vcu and it's good to go again? Or is more complicated than that? I've recently took mine off as it was starting to get abit stiff due to previous owner running miss match tires. If it can be done by myself rather than forking out £200+ then I...
  2. Gaj1612

    Fl1 L series problem

    What sort of difference did it make? And does it affect the mpg?
  3. Gaj1612

    Fl1 L series problem

    I might give that a go when I've got a few of the other jobs out the way. Changed the fuel filter today and she's running like a dream low rpm torque is much much better also. Very happy with it now
  4. Gaj1612

    Fl1 L series problem

    Already done mate ;) Got a few other bits I need to do over the next few weeks as well
  5. Gaj1612

    Fl1 L series problem

    Well today I changed the air filter and put an injector cleaner in the tank and gave it a blast it has cleared up about 99% I will be changing the fuel filter as well as soon as it stops raining for ten mins
  6. Gaj1612

    Fl1 L series problem

    Well I'm going to change both air and fuel filters tomorrow so I'll see how it goes after that. I would imagine that it would cause issues at all revs but I don't doubt any of the info I've been given. Worth having a look just to make sure everything is ok
  7. Gaj1612

    Fl1 L series problem

    Haha I know mate makes things difficult when you do have a problem It drives lovely until about 2.5-3k rpm then it goes nuts haha
  8. Gaj1612

    Fl1 L series problem

    Just had a look now all the brakes are pretty good theyust have been done not so long ago
  9. Gaj1612

    What have you done to your Freelander today

    Dropped the prop/vcu as it's feeling a bit tight on full lock and also it's had mid match tyres on so till I get them sorted it'll sit in the garden Can't believe how much nicer it is to drive. Wired up a seperate switch fort sub that wasn't connected to anything And sussed out the starting...
  10. Gaj1612

    Fl1 L series problem

    Thanks for all the info. I've had a look at the injectors today they all seem fine and the wiring is all ok. The problem I've had with stating it after reading about the immobiliser faults turned out to be the starter switch I wiggled the wires and it come back to life. So took it to put some...
  11. Gaj1612

    Fl1 L series problem

    Ok thanks I'll have a look later if it stops raining :)
  12. Gaj1612

    Fl1 L series problem

    Will do mate cheers What is it that I'm lookin for on the injector?
  13. Gaj1612

    Fl1 L series problem

    Ok mate cheers I'll give it ago
  14. Gaj1612

    Fl1 L series problem

    No mate it's not but a blanking kit is on the to do list
  15. Gaj1612

    Fl1 L series problem

    Tried to get a fuel filter today but shop was shut so I'll have to wait till Tuesday. The problem seems to be getting worse now I can't accelerate hard going up hill or it starts bouncing about dumping smoke out the back and won't rev past 3k
  16. Gaj1612

    Fl1 L series problem

    Ok I'll try that first Also don't know if it's related but when I'm driving along it cuts out all the clocks go off and I have to lock it and unlock it a few times until I can get the clocks to come back then it'll start. Forgot to mention that no lights come on the dash while it has it's...
  17. Gaj1612

    Fl1 L series problem

    Hi After my last post about my Bamp offering me his freelander for 1000 I went for it but now am faced with a problem When accelerating hard mainly in 3rd and 4th gear it seems starved and start juddering hard and won't rev past 3k rpm but if I just ease off the accelerator it stops. I first...
  18. Gaj1612

    Info on 2.0di freelander?

    Ok thanks I'll have a look when I'm on the computer as I'm on my phone ATM I think my Bamp is going to change the tyres straight away anyway so could be on to a winner haha
  19. Gaj1612

    Info on 2.0di freelander?

    Just been having a look around for a set of tyres for it. What do people suggest?
  20. Gaj1612

    New member South Wales

    Haha I will defiantly be ignoring him. Done a few head gaskets on the k series engines