1. C

    30 year landrover in a field

    Ere 90Truckcab thats nice what you done to that 2.25 3 bearing lump. How did you do it and how difficult is it to referb the rest of it? My lump is making more rattels and thumps every day and i was thinking of sending it off for a rebuild but that gets pricy, So im kind of intrested in maybe...
  2. C

    1970 Series IIa... how much?

    It would cost you around £1000 for a new galvanised chassi. And around £300 to £600 for a pto winch. so i would say if its halfway to getting a MOT its worth it.
  3. C

    Leaking oil from my wheel hubs.

    Aye i did post them here once but i couldnt find them on LZ
  4. C

    Leaking oil from my wheel hubs.

    You want to go here and download (Land_Rover_Series_III_CD_ROM_Part_5_axles_steering_brakes.pdf) One Laugh Have It! The land Rover Forum To Be On all the series manuals (use the s3 manuals as they are the same) see section 60:25:01, 60:25:14 and 60:25:15
  5. C

    Mpg

    2.25 3 bearing should get 10 to 15 off road / round town and high teens on a long run
  6. C

    Leaking oil from my wheel hubs.

    pps EP90 GL4 (Not GL5)
  7. C

    Leaking oil from my wheel hubs.

    Ps EP90 and you dont need to drain it if you are only changing the hub seals
  8. C

    Leaking oil from my wheel hubs.

    Bet your hub seal has gone and your axle breather is blocked. Hub seals cost 50p and can be fitted in under a hour (If you know what you are doing) Easy job Axel breather unscrew and clean crud off then blow through. 5 mins each
  9. C

    Lightweight Series 2a Brakes...Advice

    I would get a £50 kit from paddocks and do it me self.
  10. C

    Lightweight Series 2a Brakes...Advice

    Clean them out and file a chamfer on leading edge.
  11. C

    Yet another brakes query !

    all the shoes i have ever seen came assembled Take them back
  12. C

    Clutch!?

    your clutch isnt fully disengaging. Check the peddel end flote and the slave cylinder actuation rod
  13. C

    well needed restoration of my series 2a

    Coming on nicly Are you going to keep the engin block or get a replacment?
  14. C

    spitfire multi-spark

    Anyone used one of these ? http://www.fuelcat.co.uk/multispark.html Is it snake oil ?
  15. C

    i've had enough of my series

    Opps sorry missed the bit about a spark
  16. C

    i've had enough of my series

    Ignition switch Gets them evey time
  17. C

    question about series engine

    If you run on Unlead keep a eye on the tappet gap closing up, this is a sign of valve seat regression.
  18. C

    Ignition Amplifier Kit

    Aye i did think about making it on Vero but it would be neater if done on a pcb.
  19. C

    Ignition Amplifier Kit

    Oooo look what i found http://www.velleman.be/downloads/0/illustrated/illustrated_assembly_manual_k2543.pdf
  20. C

    Ignition Amplifier Kit

    Aye my local branch dosent have any either. :-(