thanks again for reply. I have had a auto electrician looking at it with me most Saturdays!!! it was a real mess. the ignition barrel connection unit at the back was sooo loose that if you coughed it would loose connection!! as for the indicators. we put a new reply in and all was fine. then I...

that's for all the help I have a Land Rover Series 2a & 3 Petrol Ignition Switch and Keys - lucas 551508 but can not find the wiring diagram showing which connections are which. the steering lock on the old barrel does not work anyway. so wondering if the wires on the back will just connect to...

Thanks for a speedy answer. I did wonder if I could just use the new smaller barrel unit with out the steering lock and connect the wire to it and fit it in the dash somewhere so as not to have to worry about fixing the replacement unit as the snail unit is new and the bigger steering lock unit...

Morning all, has any one swapped over a complete ignition barrel unit in a series 3. I have a second hard one to put on but just wondered if its an easy job. due to my old one having electrical problems where the cables connect. it looks like it clamps on to the steering column but wondering if...

Looks closer cheers. But looking at mine it has to have a screw that traps the inner choke cable and the a threaded bit the fixes in to the whole in the carb.

Hi thanks for that but it has the have the bit that fixes it to the carb part . Martin for

Hi all , I am trying to track down a choke bolt as in the photo attached. What's it called and where from??? Any help is great

Evening all, my drivers door has dropped a bit, just enough to stop the door catch meeting up with the plate so the door does not click shut. i had look at the hinges and the top 2 turn fine the bottom 2 have been stripped nearly and with what grips i did get they did not turn. whats the best...

hi, thanks for a great reply. i have gone through that parts manual and can not find it but as you said a nut and bolt etc and i should be able to sort. cheers martin

hi , update is that a auto electrician came and had a look and it was a really bad job. the solenoid had dies and someone had bypassed it with the cut off switch!!!!!! so that explains the melting cable and slow engine turn over. all been replaced and turns over fine and once choke cable has...

Evening all. quick question. i have just found my choke cable under the bonnet flapping around in the wind!!! the cable gas the little bolt/nut on the end but not fixed to anything. i have found the choke unit but wonder if any one has a photo of how it should fix. i am worried that i may have...

so I think first I need to get this battery checked as no idea how old. I gave it a full charge and when I turned the engine over it did just about turn over once or twice but if I try turning it over too many times , that's when that horrible green/yellow gets so hot it starts to melt. ( the...

thanks for that. I have just brought a new ignition switch as wont do any harm. as it does click round twice but the final turn to start it does not seem to feel right anyway. am now looking to see if there is a good clear beginners guide to the basic connections behind the dash board as hoping...

Ah so the one I put on that was from eBay is the one you have or the one in my s3 ? Sorry got confused .

At the moment I have this one in the landrover

thanks for that. one question ... when i replace that yellow and green cable what size / amp etc should i be getting from the shop? am learning about all this !!! promise.

hi thanks so do you think this could be ok. http://www.ebay.co.uk/itm/152285454330?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT ?

hi all what size or type of battery would be best for a 1983 3 series 2.2 petrol Land Rover as I think the one I have is very under powered . Thanks

any of these photos help

Hi yes 4 fuses in that bit . Ok great will have a look