Hello all. This what I have been dreading. The clutch pedal seems now to need to go all the way to the floor to function. Untill the car has warmed up some. I have read the Haynes manual and it gives a description of changing the master cylinder. I'm looking to do this as a last ditch attempt...

Hello all. Sorry for the late reply. But thanks for yours. Thinking on it, may go with new cradle. All depends on another issue with the motor that I'll have to post in another thread. Will be so unhappy to see this FL1 go. It passed its MOT today even given the rusty panel. Said it didn't...

Hello all. Quick question. Has anyone successfully changed the panel only on the tank cradle? In other words, grinding off the bit and sliding in new.

Thanks for your replies. Yes, this post now remind me. I changed the brake pedal switch about 18 months ago for this. Brit part! There you go. Cheers all.

Hello all. Today, at some point the two lights came on the dash. Next, when I switched off and started again they had gone off. Is this a warning of impending doom for my FL1 ? Is there some thing to watch for? Thanks for any replies. Cheers,

Hello all. I would need a head test if I got rid of mine. Got it at 70,000mls from two owners that were of the same family. Changed the usual stuff. And never skimped on servicing, don,t see the point! Every 6 thou, Filters and fully synthetic oil change. Not that expensive. For me, if the...

Afraid not. I did it half asleep one morning. Managed to get home and sort it before any damage. Always double check now.

Ahh. thats what it is. New what the intercooler rad was , but the other was a mystery. Amazed to see nil corrosion behind the Bumper. Either in the chassis section or behind the Rad. Its twenty years old?? Most of the bolts came out easy enough. One i had to chop out of the old Rad. Captive nuts...

New Res bottle to finish the job off. Put the bumper back on when I've run it and checked for leaks. Big Thanks for all your help and advice. Cheers

Would love to know what this flap is for

j

And

Seems slow at loading. Must be my phone. Took my time, front bumper was a pain.

Hello all. Had a crack at it today. Some pics.

Cheers Sir..

Hello all. Just to re-ask. Can the Rad come out with the fans still attached. So as to make the transfer of the fans a bit easier. Thanks.

Just to plug this Tread. To me, it doesn't look that easy of a job. Rad is on its way. Is there any,,to look out for, I'm not a young man by any stretch. The Haynes says it needs two, to take off the Bumber. Is that correct? Cheers

Hello all. Just looking through the Haynes manual, it states the removal of the cooling fans before taking out the Rad. Is it possible to get Rad out of the car and then swap them over. Thanks in advance for any tips on this. Cheers

Nissens 64310A Engine Coolant Radiator Land Rover Freelander 97 | eBay A thoughts. Thanks for your time on this.

What a Forum! THANKS.