I have had my renewal and it was with sureterm for £340, I have 6 years no claims, Im 26 yrs old but this year they wont let me protect my no claims. Someboady went into the back of me in 2008 and this has seemed to put my insurance upto around the £600 mark with other companys Anyone know of...

I took a pic of the gunge on the expansion tank wall Does this look normal?

There is no sludge under the rockers, It users a little coolent, if i top it up i can go around a week before its down nearly to the min level. no overheating, I also need to do the manifold gaskets as they are blowing.

The oil looks ok on the dipstick, i was just concerned that there was a tiny bit of sludge on the wall of the water bottle and the car is on 135000miles so not sure how many more miles it will do on its current gaskets, apart from that it seems ok. just dont want to put it back togeather and...

just noticed in the exspansion bottle, there is a littlebit of white gunge which might suggest its due to go. does anyone else have a thin layer of this in theres?

P38 4.6 I am doing the valley gasket due to an oil leak, the inlet gear is off, should i do the head gaskets while its off as it is on 135000 miles and i dont believe they have ever been done.

I have put 12volts to the pump directly and i get nothing, this suggests the pump is at fault.

Just to let you know i took the tank off, It took about 3hrs to get off, Pump is completely dead, put 12v to it and nothing.

Ive decided im going to drop the petrol tank, Doesnt look to hard in the rave manually. I think the pump may have burned out due to running low on petrol while running on lpg.

Hi I have got someone to turn on the ignition and i have pressed the valve in on the fuel rail and nothing comes out.

Hi, Wont start, cant hear the fuel pump running when switching the ignition on. It ran on gas okay the other day but cant get it started on gas due to cold weather. Ive checked the plugs and they seem to be sparking ok. Ive checked the rave manual and the inertia switch is the last component...

How easy is it to drop the petrol tank on a 4.6 p38 as the petrol pump has stopped working, I have tested from the inertia switch and it comes live when the ignition is on. From what i understand you have to remove the filler neck then the 5 bolt securing the tank. How long does it take to do...

I have has a problem with the battery been drained. I have put a new battery on, I have noticed even though i turn the ignition off i can still operate the wipers, Also the fuel cap relese button has stopped working. Could this be an ignition barrel fault. I have looked at the rave manual but...

P38 Heated Seats Does anyone know how hard it is to repair the element in the back of the seat? I have seen the tutorial on the base art already.

Rangerover p38 1996 Can anyone tell me what connector and wire colour the negative feed into the fusebox to feed relay 6 & 7 is so i can test it? From what i can see it should be connector c112 on the becm, white light green wire. I have put a multimeter on Negative probe on wire white light...

Range rover p38 1996 I would like to install a jack in my Clarion pu-9836a - I believe roverville do this - Does any on have a wiring diagram or can tell me how to do this?

My heater blowers dont work, if i bypass relay 6 & 7 they come into life. I have traced it down the the negative feed not energising the 2 relay, I believe this feed comes from the becm, is this correct? The fusebox is not at fault as i have checked the negative input into the fuse box and...

Hi i have a 1.8 freelander with an oil leak on the right hand front side of the engine near the thermostat housing - When i rev the car hard it seems to bubble oil out between the head gasket joint, its running ok and not useing water. Is this a common place they go and is there an oil way at...

I dont think it the fuse box because ive put a multimeter directly to the White/L Green wire which i believe is the negative and get the same readings as through the fuse box. Do you know the routing for this wire? should i be getting a solid negative 12v feed if i connect the positive end of...