I might have a spare mechanism, I will look in the garage tomorrow.

I toyed with painting my 18 inch alloys black, what colour is your car ?

Mine? It only happened earlier this evening so I have not had a chance to look at it yet.

Oden did you manage to resolve your problem? 4 pages and 10 minutes of my life I wont get back I'm none the wiser. I ask because mine did this tonight and I remembered seeing this thread, it had been very sluggish pulling away but had no issue with speed but all of a sudden it would not go any...

I went in search of the knocking noise coming from the passenger side today. I put the car on ramps and found the inner bush on the wishbone looks slightly misshaped and very slight cracked so its time to break out the poly bushes. Whilst I was under there I also found the lower engine mount is...

Its the cheap stuff off ebay. It is quite strong and pliable under heat but not the most adhesive. I found the best thing to do was wrap it right round and super glue on the rear. It stretches nicely but you do get left with a tiny crease when wrapping it on inner angles. All the coloured...

Cheers for the replies. if I go to it on say Saturday its sluggish at first, it turns over fine but can be a little spluttery/lumpy at first and does not like rev's, if I leave it for a minute or so this then clears and is just sluggish after I drive off. Come back to the car the next day and...

I only get to drive my freelander at the weekends and first trip out the car is always very sluggish. If I drive it the next day it is fine, does it have some sort of learning ECU ? Merry Christmas all.

Its only the start 500 and it held in place with two small strips of butyl tape.

Not today but whilst I'm in the mood for posting pictures up.

I did this but probably went about it the hard way.

Sorry guys but better late than never eh!

I have but I won't get to put them on here until late tomorrow night.

Or you could do what I did. I bought a Tom Tom start 500. I then removed the clock and its surround and stuck the Tom Tom in the clock recess using a couple of bits of butyl tape, I fed the power lead back through the clock hole to the centre console to pick up power off the cigarette lighter...

I have fitted the front one. They are considerably stiffer than the originals and I thought fitting all three might put more load on the centre bearings. Done about three months now, so far so good.

Fairy Liquid ingredients; • Aqua • Sodium laureth sulphate • Alcohol denat • Lauramine oxide • C9-11 pareth-8 • Sodium chloride • 1,3-Cyclohexanedimethanamine • PPG (polypropylene glycols) • Dimethyl aminoethyl methecrylate/hydroxyproply acrylate copolymer cirate • Parfum • Geraniol • Limonene...

Can you add a heated screen?

The sport does indeed have lower stiffer suspension and the handling is quite good really. When I was buying I was originally after a manual but after driving both I found the auto was a much more pleasant driving experience.

I'm still relatively new to Freelander ownership, I drove both when purchasing and opted for the auto. Its only had one offroad experience so far and it performed very well.