Ah do what I did take them off an mgf. they are basically the same but from memory they only rivet in three places. Also they have a bit of metal that sticks up and fouls the plastic door cup, just bend this back and all will be well.

That looks familiar

Driving lamps wiring loom. left over and surplus to requirements, I don't have the original pod style lamps but there is no reason you could not use this loom to power driving lamps of your choice. There is one small section of wiring missing (small loom, bottom one seen on the page in the...

Something trivial, changed the little badge on the steering wheel for a black one.

I wouldn't bother trying to re-use the bush as its probably delaminating from the metal inner sleeve.

Has it been poly bushed as well? I have just changed all my front bushes for poly ones on my sport and the ride is noticeably firmer.

I don't know if you have seen these but scroll down the page. http://www.mansfield4x4burystedmunds.com/freelander_accessories.php

The you tube video is handy. Does yours have a sunroof? I had an old Mondeo that suffered with condensation, it turned out to be the plastic membranes under the door cards were coming away and allowing moisture in. Once resealed the problem went away.

Yep all over that as I use co ax at work. thing is it was fine before I changed the head unit for an aftermarket jvc unit. when its a bit nicer outside I will try a new aerial base just for good measure.

I have a poor radio reception issue, I have replaced the aerial and fitted a signal booster neither has made a jot of difference.

Replaced the battery in the remote, no more bleeping.

I'd love a seat with height adjustment.

o_O Mine on a td4 can be opened whilst driving.

Has anybody put a led bulb in the rear boot light, what bulb is it ?

I have the same leak. Do you have the sump guard in pieces? mine is missing the black cover and I could do with someone very kindly tracing a template as I want to make a replacement for it.

I have had an annoying squeak from underneath the front when switching of the engine for sometime. This weekend I have been replacing the wishbone bushes both sides (nearside were completely shot and the large bush on the drivers side was on its way out) Not only has the ride improved and the...

Finally fixed the knocking from the nsf. Both lower radius bushes were knackered (although just a visual inspection didn't show it) I have poly bushes to do throughout so I used these, at the moment the other side is standard and you can feel the poly bushes are much stiffer.

I swapped mine ok, are you sure the damage could not have been caused by something else? Mine has a big foam block behind it, I presume its to avoid contact with the aerial base.

Autoglym vinyl and rubber care is good for restoring the black plastic parts and it lasts nearly two weeks.