1. 6

    Brake Pedal gradually going to floor

    Hi Nodge, if it was air in the system, I would expect to be able to pump the pedal up and then have a 'springy' feeling. If I pump up the pedal and then hold it, it sinks. Yesterday I did use it and it was 'ok' and I did cycle the abs by hard braking in some quiet spots. I have nothing to lose...
  2. 6

    Brake Pedal gradually going to floor

    Hi all, I have been having brake issues, I think a result of a period of standing while sorting out an auto gearbox issue (Thanks Hippo). The brake pedal slowly sinks to the floor, if held. I found a leaking rear wheel cylinder so replace both cylinders and the rear shoes. The pedal was still...
  3. 6

    Alternator Question

    Hi Andy, so I removed the 2 wire plug and it makes no difference. I could have the fun of removing the 'main lead' but that happens when I take battery connector off. I will just live with it for the moment, as long as I use it daily it doesn't go flat. Other more pressing issue on it at the...
  4. 6

    Alternator Question

    Thanks. I have checked and AC clutch appears to be working ok. I have been thinking about this a bit more and nothing else but the alternator would still have power with the ignition off (in that area). I used a hose as stethoscope to listen to parts and pretty sure its the alternator now.
  5. 6

    Alternator Question

    Ok an update on this- after disconnecting the battery and charging it, on reconnection the noise had gone. However after going for a short run, it has returned when the car is ignition off. Continues all the time. I am getting 14.4 volts so it s charging ok. Its definitely in the area of the...
  6. 6

    Alternator Question

    Thanks Nodge.
  7. 6

    Alternator Question

    Thanks Jedi. Not the fuel pump, as this is ignition off/key out noise from the front right of the car. Re the automatic, I am doing ohm checks etc at the moment. Thanks for taking time to reply.
  8. 6

    Alternator Question

    Thanks Andy, the noise was several days and I think led to the flat battery. Now I have a working charger I will se what happens. Thanks
  9. 6

    Alternator Question

    Hi Nodge, thanks for reply. Sorry what is the FBH? A little update on this, is I tried charging my battery, but turns out my charger is cream crackered so just bought a new one. What I did notice when I reconnected the battery, is the noise has gone (it was drivers side front 99% sure it was...
  10. 6

    Alternator Question

    Thanks AndyFreeLandy. I am afraid I was not clear enough. The noise is when the engine is turned off and ignition off and car locked/unlocked Its not an noise in use.
  11. 6

    Alternator Question

    Hi, I suspect my alternator has a fault. I can hear a 'hum/buzzing' which appears to be the alternator. (2004 TD4 Automatic) Has anyone had this or know of the issue. My battery is going flat over a few days, so I suspect it is the issue but at circa £120 I would like to get some confidence it...
  12. 6

    Egr Blanking Mod

    So removed my EGR today to fit a 'bypass' and its been replaced previously with a standard one, so it wasnt too bad. However, when I removed the inlet manifold as it was quite mucky, the round ports were about half their original diameter. I have been oven cleaning for about an hour with bottle...
  13. 6

    Egr Blanking Mod

    Thanks you Nodge68
  14. 6

    My first Land Rover just bought. Freelander 1 TD4 2004

    Any cars or just Land Rover ;-) Not got one of the Freelander yet.
  15. 6

    Please ignore - found answer in forums: New Ignition Key and FOB programming

    Sorry all, found the answer elsewhere in the forums and trying to delete this. Hi, my FL1 has only one key and fob. Do I need to get one from LR as I assume the key has some chip to match ignition. New fobs need programming I guess? Are either a DIY Job? Thanks
  16. 6

    Egr Blanking Mod

    FL1 - Interesting thread. If I understand correctly the EGR valve opens by vacuum? If that is the case wouldn't just blocking the vacuum feed stop the egr valve opening and effectively remained closed?
  17. 6

    My first Land Rover just bought. Freelander 1 TD4 2004

    Hi, thought I would introduce myself to the forum. I have just retired and after 48 years of driving, approx 60 cars, now own my first LR and 4x4!! I have a lot of car experience and knowledge in mechanical, bodywork and electrics so while undaunted by most jobs, I'm not as enthusiastic as I...