+1 mine vents over the right wheel arch simple as that. Never made a drop of mess

You got something in mind?

I'd imagine it's slightly cheap than just keep nipping to Paddocks. I have to hide all the green receipts lol

I live 10 mins away from them so don't have to order online hehe. Odd time I do they are usually pretty quick at getting it sent out. Quicker than queuing on a Saturday in there anyway

Not in any rush. Got a second 90 I want to make into a road going truck or currently has a truck cab roof and back

As per title. ta

that might come with the loom, just get a 30amp relay for each seat and cable thick enough to handle 30 amps, im sure I read that both seats go through the same 15amp fuse on the rx8 so 30 amp is plenty enough, the switch you install will just activate the relay and the power goes through the...

I wouldn't use your feet on the windscreen, undo the seatbelt upper bolts that hold the roof down to the side panels after the doors, this allows the roof to flex up a little more and makes it easier to pull the windscreen towards the bonnet at the top, then as previous posts state, lift off the...

mine r gywn lewis at 64 quid a set delivered but bump anyway :)

No they are on or off. The only part on the seat is a positive and negative underneath for the passenger and a few more for drivers. I use some carling on off switches I did buy some rdx heated seat switches for 20 quid for a pair but they were out of stock until at least November so I got a refund

Only bit I got was the cables attached to the seat. Join to the cables via a relay and off you go. Any on off switch works

I cut out the seat belt wiring and cut back the air bag wires as well. Just left the heated part on the passenger and heated plus controls on the drivers

I think most make L shape brackets up that push down the switch when closed.

I have never done anything like this before, I brought the tools needed bit by bit before starting, wasn't too hard to be honest but I think the hardest part for me was replacing the real L shape seals on the rear bearing cap, had a nightmare with that but touch wood it doesn't leak. I didn't...

I paid 2800 and sold the spare wheels for 300 for my 19j 1989 ninety.... 4 years ago and was a rot box that's taken until now to sort out. Not two weeks ago I brought another 90 same year with genuine 200tdi def engine in it. Couple of leaks, really good chassis and slight rust on the bulkhead...

Egr blank kit will come with a new pipe and it improves the engine I reckon

I undid and got rid of the two rear gold coloured bolts on the passenger seat leaving the two front ones easy to get at

They are awesome. I was a bit sceptical going from buckets to rx8 but half a day's work cutting and welding some 40mm box to the bottoms and wiring them up was easy they are nice and look the part. Heated seats work well also. I only paid 110 for mine

Wow just wow

As above def will but the disco ones have hockey sticks like the front def axle.