think il just stick to standard, was just an idea

At £600 I have to agree, I’d pay £250 tops for a used one,

Could you make me one? sounds like you know how it’s made

Anyone know where I can get a bowler gear stick at a reasonable price

Yes it has eight coils their not new out been around a while, I want to be able to put it in the garage without taking pressure out the Tyres and it’s use more on road than off so more road spec than off road it’s only used off road when I go shooting!

Yea but the springs were 3.5 cm shorter the stock ones!

Funny enough the stock springs are 1 and 1/2 inches longer but after putting the new ones on the after a before and after measurement of the car height it’s only 2cm lower which is odd, the ride seems fine, I have maltings 4x4 sending me another pair of springs because they said some of the...

They should have sent me the Tf1033 that state they have the same strength has stock but just 1inch lower, but like a I said it’s actually only 2cm lower than it was when I measured before fitting them so they are clearly softer springs than stated!

No not yet, they did actually send me three pairs of springs for what ever reason, when I obviously only ordered two! So now have a spare front pair!

I got the from Maltings 4x4 their terrafirma TF033 ment to be 1 inch lowered spring with the same spring rating of standard

I think I shall put the standard springs back on the rear as I think the terrafirma springs are just ****, I’m convinced there rating of standard spec is bull**** and their a lot softer spring an I wanted which is why my bump stops are hitting the axle because when it’s static and I measure the...

I fitted it myself but thanks anyway

No, their just standard 2.0 fox but I have checked the rubber bump stops on the shocks themselves and they are definitely not bottoming out!

Hi guys I’m new on here i have a defender 90 2.2 puma and Iv had these springs fitted with fox shocks front is fine but I seem to be getting what sounds like the bump stops hitting the axle over speed ramps etc! I did put a blob of grease on the bump stop to see if that was the problem, It was...

Funny you say that because after measuring the height before changing the springs it was 87cm and now it’s 85.5 so has actually only dropped it 1 and 1/2 cm so it really should make any difference! Besides I’m looking for help not criticisms!

Yes I wanted to lower in slightly to get in the garage plus make it handle better, iv also installed the alive tuning 25mm rear arb!

Hi Iv had these springs fitted with fox shocks front is fine but I seem to be getting what sounds like the bump stops hitting the axle over speed ramps etc! I did put a blob of grease on the bump stop to see if that was the problem, It was definitely hitting the axle so I cut them down to...

Hi Iv had these springs fitted with fox shocks front is fine but I seem to be getting what sounds like the bump stops hitting the axle over speed ramps etc! I did put a blob of grease on the bump stop to see if that was the problem, It was definitely hitting the axle so I cut them down to...