Could be fuel run back. Caused by a failing in tank pump? If the pump is getting lazy it would explain the cranking to start and the sluggishness when you put your foot down (ask for more fuel) just a thought

I could literally see the bushes intwist! Could you prehaps point me in the direction of the best place to buy a IID tool?

Just finished checking my rear suspension bushes. After replacing the drivers side rear a few weeks back I had forgotten to check the hub was the correct distance away from the top of the wheel arch and this had resulted in the bushs having a twist in them. After slackening them all off and...

Just a thought but fit a new clutch? If engines out it might be worth it?

Yeah I have the clock on the dash but would really like the 4x4 info too.. beer tokens up for grabs ;)

Going back to the IID... wouldn't mind the off road info turning on on the sat nav screen...

Thank you. I've had a good look through it and I think I'll do as laid out in my above post ^^^ losen it all off and measure it up.

Thanks for the replys... it looks like I'll have to do the following then... Remove the rear wheel Slacken off new wishbone thing Use a trolley jack to jack hub up to 485 is achieved Then tighten bolts back up nice and tight Re fit wheel? How does that sound? I'm assuming 485mm is the...

Bit of a long shot. But I don't suppose any of you guys are in the Norfolk area this weekend are you? My D3 is cocking a leg after I replaced the rear upper suspension bush. I moved the height sensor whilst fitting new the new arm!! Does anyone have an IID tool who knows how to recalibrate the...

They look good!

+1 ^^ if you ran it right out it will of sucked air in. Crack off injectors, have some one crank it while you shut them as fuel without bubbles appears.

Fitted some black alloys to the red D3 looks good.

Seriously I kid thee all not! It was the bloody roof skinning. Next time you have the roof lining out have a look above the drivers seat and you'll see the area I mean. I'll see if I have an image of it.

OKay.... Thanks for the input

Hello all your right people should make sure they put the fix at the end of a thread. Ok so after everything I did, swapping the flax plate, drive shafts, wheels, viscous fan and countless other parts It turned out to be the skin of the roof had come away from the body work and was vibrating...

Hello there

Thanks for your help I'll get some quotes tomorrow.

Thanks for the reply it's a red disco so thought it would look good with black alloys that was all. I was thinking, peal the flakey bits off and just spray the whole wheel black? Will it stick without the hassle of sanding the lacquer off.

Hi all, Just a quick one. I have a spare set of alloys for my D3 that have no curb marks but the paint is pealing on all of them. I've bought a new set of tyres for my "good alloys" and I'm going to swap the usable tyres on to the old set. My question is can I, after peeling the flakey bits off...

Hello and welcome