I didn't need a new one. It was just the connection to the loom. Cleaned and tightend the connections and it was fixed.

Hi I got my power back it was a dodgey wire on the injector with the wires. I just need a box now. Thanks very much for your help.

Hi all can anyone tell me the difference between the two box's? And is it possible to fit the 4hp-24 to a 1997 2.5 diesel p38? I dont how true it is but apparently you can and there supposed to be a stronger box and there's more of them for sale. My box is shot and needs replacing asap. Thanks

Anyone out there with a nanocom? I'm in desperate need to get this rr sorted but I dont know where to start without reading the faults as my diagnostic won't read it properly. I'm based in Cambridge any help would be much appreciated.

Sorry yes map sensor is doing something when engine is under load. Trying to get another temp sensor today. Could this cause the other temp sensor not to work? The diag I have is a snap on solus pro. I need someone with the nanocom but can't find anyone with it. Cheers

Thanks guys much appreciated

Hi please can someone send me a wiring diagram for the engine ecu for a 1997 p38 2.5 diesel. I need to check the engine bay wiring back to the ecu. I tried downloading RAVE but no luck. Cheers

Hi I don't think it reads modulation could there another term used for it? Is the wiring connector correct for my blue temp sensor it only has one wire but two pins in the sensor. Also it seems abit strange how everything in that area doesn't work both sensors and that injector? I found loads...

Ok so I justr read somewhere that engine speed signal is needed for the injector with the wire. I noticed my scanner was reading 92rpm and didn't change if I revved the engine? But if it didn't know the engine speed surely it wouldn't start. Would someone be kind enough to get me a wiring...

Ok just been out with rr now the sensors are in the correct place blue one nearest the front of engine. Now the blue one is a 2pin but the plug only has one wire is this correct. I tried the boost hose and replaced the pipe on the map sensor but there is still no power I'll pop some pics up. Cheers

Ok so do the electrical plugs on the temperature sensors both fit each other can they mixed up and plugged on the wrong sensor? As I guess both the sensors are screwed in to a water way. Yes it has the air temperature sensor in the bottom of the inlet manifold. It was registered September97...

Hi no maf sensor vas far as I know I'll check later. There is a blue sensor but it's the second one along and it looks new. I'll get some pics tonight so you can see. Cheers

Ok thanks again. It has a metal inlet no egr but it had the metal pipe from the exhaust to the egr but it's been blanked off.

It has air con and I think it's a 1997 not 100% sure only had it a week. It's an R reg

Hi I've had my rr p38 2.5 diesel on the diagnosis last night and the temperature read out for the engine is -35 and the fuel temperature is also reading -35 the engine temperature on the dash does not work either. Which of the sensors need changing. There are two near the front of the head under...

Ok thanks for the help much appreciated.

There's no one. But I may have someone through Facebook just waiting for a reply. Also do you know if the gearbox ecu has to be coded or can I just try plugging another one in and see if that cures my problem?

I would but I don't know anyone that can diag the gearbox no one has the correct diagnostic reader.

Hi yes with fuse 11 in it still drives in reverse no problem. I can move the transfer box motor by putting power to it but it makes no noise when the fuse is inserted. I'm going to send the gearbox ecu off to be checked first, is this under the passenger seat? Thanks