1. Bone9

    Bone's V8 Disco 2 Build Log

    Cheers mate.
  2. Bone9

    Bone's V8 Disco 2 Build Log

    Todays job was to replace the wiring loom conduit as it was crumbling away! Before... After...
  3. Bone9

    Bone's V8 Disco 2 Build Log

    So I've been busy and removed my LPG system as my local garage has put the price up to £1.29 per litre!! It's now cheaper to run on premium unleaded and less hassle. It's never been 100% anyway and I'm relieved to have it off. No more stressing about fuel trims etc. The landy drives so much...
  4. Bone9

    Bone's V8 Disco 2 Build Log

    The road test was perfect with the BMW sensor, no false readings 👍 Today I fitted a new condenser and receiver/dryer. Must of had a slight leak as only had 200 of refrigerant instead of 700. All sorted now and extremely cold AC :D
  5. Bone9

    Bone's V8 Disco 2 Build Log

    My coolant bottle decided to crack so an upgrade had to be done. I've installed the BMW expansion tank with level sensor. I've also removed the throttle body heater as It developed a leak again!! I've ran an 8mm silicone hose from the lower inlet manifold that has a braided sleeve to prevent...
  6. Bone9

    V8 vacuum leak on throttle body spindle

    My friend had a good one.
  7. Bone9

    V8 vacuum leak on throttle body spindle

    I swapped the throttle body.
  8. Bone9

    Bottle Jack seals

    Any update on the video mate?
  9. Bone9

    D2 boys club

    Ah ok. Cheers mate.
  10. Bone9

    D2 boys club

    Thanks. When do you think the website will be back?
  11. Bone9

    Disco 2 How do you fit the ****ing A pillar trims?

    There should be no gap.
  12. Bone9

    D2 boys club

    Can someone who is on the FB group request that I'm accepted please?
  13. Bone9

    Bone's V8 Disco 2 Build Log

    Thank you for the kind words sir! Plenty more to come!!
  14. Bone9

    D2 boys club

    Cheers mate.
  15. Bone9

    D2 boys club

    I've requested to join the Facebook group to try to get some more info, not been accepted yet.
  16. Bone9

    Bone's V8 Disco 2 Build Log

    Been working on my rear switch pod for camping. The centre switch just turns on the illumination for the genuine carling switches. I've used 1.5mm trailer cable to run to my fuse box and rear quarter. I added a nylon braid and heat shrink to this to make it look cool and to give it some...
  17. Bone9

    Bone's V8 Disco 2 Build Log

    Pic's as promised...
  18. Bone9

    Bone's V8 Disco 2 Build Log

    The new door seal has done the trick and we are now bone dry in the passenger footwell!!!
  19. Bone9

    Bone's V8 Disco 2 Build Log

    Hi. I've had no comment about a draft in that area. I'll ask someone to check next time there with me. I very much doubt that a draft would come from a seam. It must be from somewhere else.
  20. Bone9

    Bone's V8 Disco 2 Build Log

    Hi mate. Yes mine has all the correct patch leads etc to have fully functioning steering wheel controls. I'll get you a pic asap 👍