Morning all - does anyone have an LT95 fitted in a D90, with overdrive? if so, would really appreciate some pics of how/where you have the OD lever. I've bought myself such a box (although the OD lever appears to be simply a long bolt...) and just trying to work out where that will fit...

Thanks for that. Had another look at it and the more I look the more I think that the whole lump out of the front will be the easiest option....

Afternoon all. I have a Defender 90 with the engine & 'box from a RR Classic fitted. Was like that when I bought it, all runs nicely although the gearbox is a bit noisy, and very low-geared........so........when I was offered another LT95 box with an overdrive fitted, for a good price, I...

Thanks for the replies. I did flush the matrix out earlier, lots of clean water coming out and no muck. From what you've both said, the plumbing does seem to be right, or close. I'll have another go at bleeding the matrix and see how we go from there. Thanks again.

Morning all, does anyone have, or can anyone point me at a schematic diagram for the water flow on the Rover V8 3500 (carbs) please? I may be being a complete numpty here ;) but in the face of a not-very-warm heater (no real surprises there!) on my 90, fitted with a 3500 V8, I decided to...

Well, I have an odd (to me, anyway!) little problem which I hope someone can advise me on. Bought an early 90 recently, fitted with an early (74/75 ish) Rangie V8 and gearbox. Long story short, it doesn't run very well so I decided the best course of action was a full rebuild of the...

Thanks for all the replies. Yes, I have suspected the steering wheel buttons/rotary coupler, but haven't had a chance to investigate those yet. Does one of the plugs on the rear of the HU feed just those connections? And if so, could I remove it to test? I suspect the car did originally...

Thanks - but when it works, it all works! It's the intermittent bit that is so annoying!

Does anyone know of a H-K specialist, preferably in the South East but all areas considered! I have an intermittent problem with mine in the P38 - sometimes it works, sometimes it doesn't, sometimes it's loud, sometimes it's quiet. I'm fairly convinced that it's a loose/broken wire somewhere...

Hi - can someone tell me where the DSP is located for the 2000+ models please?

Evening all, At the weekend, I changed the switch panel above the radio on my 2001 P38 4.6 Vogue (old one was damaged). When I started the job, I pulled the radio out a bit to check whether there were any fixings for the switch panel behind the radio (the panel comes down behind the radio and...

Afternoon all, new here although I'm a veteran of (a) Solihull ownership and (b) forum usage in general. Anyway, my P38 has decided to throw a rear hub oil seal for some reason. It was bone dry on Wednesday, but I did about 400 miles in it yesterday and overnight it left a large puddle of...