1. Riich

    How quick to change an engine?

    It took 4 1/2 hours with two of us from undoing the first bolt to putting all the tools away.
  2. Riich

    How quick to change an engine?

    I like the sound of that
  3. Riich

    Turbo actautor pipe

    I measured the old stuff to be 6mm id, 11mm od
  4. Riich

    How quick to change an engine?

    Couldn't ask for a better location ☺
  5. Riich

    How quick to change an engine?

    I'm on a bit of a tight time line for my engine swap. I have a newly built one to go in and it should be a straight one out one in affair (hopefully). I've changed plenty of other engines in the past, and I'll have the added luxury of an overhead crane, workshop, forlift etc to use. If I went...
  6. Riich

    Turbo actautor pipe

    I ordered a male 1/8 bsp right angle barb for the manifold, I'll drill and tap the plug to suit. For the turbo I ordered just a straight male 1/8 bsp barb to replace the existing double connection. And 2m of 6mm id vac pipe for £7
  7. Riich

    Turbo actautor pipe

    Any idea what thread that is? I have a blanking plug there on mine.
  8. Riich

    300tdi O Ring Size

    I measured the pipe and figured it out. 11.5mm id x 2.5mm thick
  9. Riich

    Turbo actautor pipe

    I'll look into that. I'm guessing I'll need to drill and tap for a fitting into the manifold?
  10. Riich

    Turbo actautor pipe

    Just check, the hose I bought is rated for 10 bar, so hopefully it'll fit.
  11. Riich

    300tdi O Ring Size

    Thats the other option I suppose. Not sure if the above link with sizes are right, I found a dirrerent place with different size listed http://www.land-rover-parts-shop.com/en/ui/search.php?q=Esr1594&stp=s
  12. Riich

    Turbo actautor pipe

    I was hoping so. I have some injector pipe leak off spare, will that do?
  13. Riich

    300tdi O Ring Size

    I've just spent the last hour looking for it. Thanks!
  14. Riich

    Turbo actautor pipe

    Part number STC4617, are they really that expensive? Surely theres a cheaper solution - its only about 4" long and 1/4" dia ffs!
  15. Riich

    300tdi O Ring Size

    I want to replace the 4 o rings on the cooler pipes. I know the part number - ESR1594 but it come to less than a quid then £6 postage. I know I can get them locally, but can anyone tell me the size I need please. Mine are too far gone to measure.
  16. Riich

    Misc copper washer id

    Not injector washers as I've already firred them
  17. Riich

    Misc copper washer id

    I thought valves at first, but only because theres 8, but in reality a copper washer on a valve won't last long. The other 4 look like they may be for banjo union possibly? But the shaped one on its own and the silver ones I have no clue.
  18. Riich

    Misc copper washer id

    Nope, no parts list. I've built lots of engines over the years and always have these odds and ends copper washers left over, just wondered what they're for.
  19. Riich

    Misc copper washer id

    Anyone have any idea where these go? Its part of a headset for my 300tdi
  20. Riich

    Part numbers?

    Next question - suggestions on a suplier as I don't want Bearmach