That is the correct operation of the lights.......nothing to see here, please move on :D

As Barbados says, nothing wrong with that alternator voltage, you will just be wasting time & money replacing it.

Not that I need one as I have one of Clive's on mine already but just wondering if it is worth tracing the shape of the extensions out for anyone that may want to make repair patches in the future?

A few years or a few decades?:D

Not LRs fault, it was the previous bodgers fault!

Was it like that before everything got replaced? If it was ok then I would suspect a duff thermostat

One of these cases where Clint would say 'do you feel lucky punk?' :D

Glad to hear it is working, curious they used the term 'no such output' when it is actually a receiver we are talking about so it would be an input. Probably just covering their rear in case it blows up and takes out the local primary school or causes a tsunami or some such drivel :rolleyes::D

Should be staked nuts but reverting to double nut arrangement is not unknown so who knows?

An ideally a torque wrench to do them up

If you do go for the install do you still have the original engine type fitted? Old landies often have a lot of mods carried out and if the engine has been changed in the past for something like a 300 then the parts you need will be different

Read post 4 & 7 :rolleyes:, immobiliser relays do fuel and starter and suffer from dry joints!

Glad you got it sorted, the immobiliser was my mistake I used that term when I should have said a remote key fob. That is what signals the green ECU behind the dash and turns the light on when you disarm the alarm and keeps it on for about 20 seconds

Looking at the pcb I would expect this area to be a ground

Have you tried google translate app on your phone? Just hover over text and it translates reasonably well when I tried it (Swedish)

Tech blurb on the aerial website says 'ground plane independent' so that shouldn't cause an issue with the mounting. Looking at this from a distance (and all the usual caveat stuff) I would think you are correct in assuming you just need to identify suitable connection points on the pcb...

This sort of stuff (antenna matching) can actually get fairly complex when you get into the nitty gritty stuff. What sort of antenna mount do you have as that would form the ground plane rather than the pcb? I assume you have a coax cable with a sma connector at one end (to mate with the...

Unlikely (but not improbable) that both door switches have failed but if you have grounded the wire and it doesn't work you need to be looking a common issues rather than a single switch. I assume the light works on the manual setting, do you have a factory immobiliser fitted (as that controls...

There is on my CSW

I've wondered that myself, I think it is only present on 300 FIPs that have EGR and throttle position potentiometers. It won't be hand throttle as it doesn't control RPM, I think it either changes the injection timing or potentially some sort of cold start device but mine doesn't seem to make...