The back readings are 119 and 95- is it best to average these and see what happens?

Thanks all-will give it a go. Will calibrate all heights-I'll make a measuring stick-I've also made a set of blocks out of hardwood-but stick seems a bit easier. Many thanks again Steve

Just a quickie-fitted a new rear sensor (arm snapped)-ride heights have also been a bit iffy over the last year. Got the RSW eas software running -measured stored values for standard height- 100 100 105 105 I then used the heights function to get sensor heights and used my measuring tape and...

Got a new sensor. Put it on faulted straight away-RR sensor inconsistent (or similar) Took live readings and the value of this sensor changed every time I did a reading. Took it off , measured resistance totally inconsistent between inner and an outer pin-wiggle it and it changed - frequently...

I gave up changing seals-years ago they lasted a good while. I bought a new pump off @kurtjohnson10 -fantastic price and service.

Found my old laptop and the eas cable-but do you think I could find my usb to serial converter? Last saw it about 10 years ago-ordered a new one-hope the lap top works.

Drilled the one part-but having difficulty drilling the arm-will take it to the bus depot where i volunteer and use the pillar drill.

Doing a bit of de-rusting the calipers on the car and noticed the arm had snapped off the height sensor. Don't know if I knocked it or not. The rubber elbow was totally seized so might have put a bit of extra strain on it. might have been the cause of the car leaning to one side a bit when...

loody cars! Been doing z few jobs on the p38-been cleaning up and painting the underneath, brakes and back plates. Had another go at changing the temp sensor-been using a dongle and torque lite for a while. Removed air con compressor but still can't get a socket or a bent spanner in it. Looks...

Swapped over some swollen wheelnuts for better ones.

Took the dogs out .

Thanks Kurt-replied- been away for a couple of days.

Thanks Datatek-will have a look. Regards Steve

Thanks-yep mine have been the same-the seals seem to be much stiffer than the ones I bought a few years ago.

Had the P38 16 years now-rebuilt the pump and a spare a couple of times-now both don't last very long and the current rebuilt one is very noisy. Any recommendations where to buy a new one from and I would imagine a Dunlop is best? Any help greatly appreciated. Regards Steve

Update-friend who mot'd it yesterday showed me that the drier had rusted through and was leaking-so may put another on or open the roof!!

Thats a cracker Wack-been following this on auto****e. What a lovely colour!!!!

Another MOT pass yesterday. Need to clean the calipers and back plates up as quite rusty. Also found out why aircon not working-the drier has rusted out.

Just read this from Les Edwards of Classic Rides North Wales "I have some exciting news for you. New and very compact is our new EKA Dongle / Pods. We are now taking orders for our new EKA Pods that electronically enters your EKA code and unlock any engine disabled alarms etc. Tell us your eka...

Bridged relays and tested with fans running-still the same so must be a leak.