Hi All, Ok todays job is to look at the speedo and the heater box as I have never had goog heating and I managed to pull the speedo cable out. The speedo is fixed hence the title being about the heater box. Ok it has two cables, on on the top with I think directs cold air into or around the...

I may well give that a go.

Dont worry I'm keeping it, just a little frustrated at it.

Hmm, I'm getting it up on some ramp Friday, I have the day off work so it will arrive warm, and I'll take it from there, if the block is cracked then I'm going to get a good engine fitted as I want to keep the car....

Nope in a different place and the bolt did tighten up just was a bit creaky.

Whats one of them?

Ok for the bolts etc, the bolt which did not go in perfect creaked when I dialed it in. I did the correct torque sequence and used a dial guage. However, the bolts were all over the place when I took the head off, nothing was done up properly. I did clean out all the bolt holes and ensured...

Hi, Ok I think I have a leak on the right side of the engine where the manifold is, between two of the core plugs, as anyone ever heard of this before?

Ok got the car running and the final pipe I have not replaced is leaking!!! Arghhhhh, will replace it, hoever I think the block is leaking.

Going to get it running tonight

I do, what do you need a picture of which parts?

Well that was easy I just replaced the heater matrix in the heater unit took 12 minutes start to finish, I did however already have it out of the car.

The picture says Rock Sliders to me.

Keep it origional Mike.

Agreed 2 person job, when I have done doors before I have always had someone hold the door in alignment when I have done the hinges up. If you need a hand shout.

I have to do mine soon with new rubbers when you know how to do it let me know ;-)

Ok, cleaned the oil off which I put on the block to ensure the all the surfaces were cleaned and cleaned out the threads. The head is back on, I did use a torque wrench and dial guage. I'm a little worried one of the M10 bolts was creaking when dialed in, all the others were ok. Hopefully its...

My head is going back on today! It's all shiney.

Ok, its all going back on today.... I'll post some pictures up, I did get my injectors cleaned as well, although I did not get a report back with them which always make me think hmmm.

You just need some more parts now