Can anyone help me , Which way up does the worm drive on the output shaft fit . on one side it looks like oil grooves , do they go to the shaft shoulder or toward the spacer . or does it not matter . I thought it had to go one way or the speedo would go backwards .

What i have is a FRC9460 intermediate gear cluster 19-41-38 teeth FTC1741 HI-gear Thin teeth 34T FTC1084 LOW-gear Thin teeth 40T FTC5089 Input gear x-drilled This is what ive gone with , THIN Dogs hi/lo...

What i have is a FRC9460 intermediate gear cluster 19-41-38 teeth FTC1741 HI-gear Thin teeth 34T FTC1084 LOW-gear Thin teeth 40T This is what ive gone with , THIN Dogs hi/lo .... im just hoping ive got the correct pairings

i have 2 donor boxes a def and disco , gears are different ratios 1'4 1;2 . But info is vague it says early boxes thick dogs later thin dogs , then says all DEF 85-2005 and in the same statement early are boxes A-B later C-F , well these thick came out the D box . So ie on syncro gearboxes it...

Anyone have an idea or an opinion . my thoughts were the earlier thick teeth are stronger , but maybe harder to engage so the thinner teeth were designed but are not as strong .

Does anyone know if on the LT230 t/box the earlier THICK dog teeth are better or worse than the LATER thin dog teeth .

now you all tell me . Garden sprayer tried that , i was better with the litre sealey pump thing im using now .

Hi which are better on the LT230 Thick dog teeth or the later type thin .

Ive done it , just ordered one .

Ha can i give you £20 for your kinked pipe one and you get a nice shinny new one

Stripping my LT230 t/box , the hi/lo selector sleeve and hub got parted !!!!!! , it just happened , i know you are meant to keep them together and marked . Now is this the end of the world , or will it be ok .

Im so tempted and you have convinced me even more

Eventually is right , this sealey you pump it up and is pressure feed to the pipe which has a tap on the end . at £80 i did expect better but one chap was happy with his . If i go OIL SAFE its £170 and some for different pots @ £30 for different oils , its how many times am i going to use it ...

Just got a SEALEY oil pump VS70095 , not the ltr one , the larger one 3ltr . Has anyone got one or used one . im not sure if its up to the job of EP90 , and pondering sending it back and getting a OIL SAFE pump , which is up to the job . .

Do i just need the rear gearbox seal x1

Hi i think ive a leak at the rear of my R380 between it and LT230 T/BOX , I know i need the o'ring on the intermediate shaft for the t/box weep , But how many seals is there between the T/box and the Gearbox Im guessing one , but some sellers seem to be selling pairs , so is there another in...

Hi thanks that good to know, there is a definite step on the dog teeth next to the small gear , but not on the dog teeth which are next to the big gear of the output set .

Its the teeth where the selector collar is . Pointed out in one pic . Thanks gerry

Is this an acceptable amount of gear weiar .

hi has this sold